Cisco Systems Broadband Access Center manual Acme.Com

Page 37

Chapter 3 Installing Components

Installing Components Using the CLI

Step 11 Press y and Enter to continue. The program then lets you decide if you are going to be provisioning voice technology devices. For example:

Are you going to use a device(s) that supports PacketCable voice technology?

If you are going to use PacketCable devices we need some more info. Enter Yes to Install PacketCable and No if you do not want Packetcable installed [No]: yes

Step 12 Press y if you are using voice technology devices or n if you are not. If you are not using voice technology devices, you will be prompted to enter a shared secret password as described in Step 14. If you press y, the program will prompt you to enter several voice technology properties. For example:

Enter KDC Realm Name

 

ACME.COM

 

Enter the IP Address of the Primary DHCP Server.

10.10.10.1

Enter the IP Address of the Primary DNS Server.

10.10.10.3

Enter

the IP

Address of

the

Secondary DHCP Server.

10.10.10.2

Enter

the IP

Address

of

the

Secondary DNS Server.

10.10.10.4

Step 13 Press y and Enter to continue. The program prompts you to enter the shared secret password.

Note You must use the same shared secret password for all BACC servers on your network.

Step 14 Enter the password that you want to use for authentication among BACC servers. For example:

Shared Secret Password

Enter the password to be used for authentication among the BPR servers.

If you are performing a lab installation, then the password will be used for all the servers. If this is a component installation, then the password you enter must be the same as the components previously installed.

Enter the Shared Secret Password [secret] changeme

The program prompts you to confirm the password.

Step 15 Enter the password again.

Step 16 Press y and Enter to continue. The program then displays the installation parameters you have selected. For example:

Installation Parameters

This screen shows the installation parameters that you have chosen:

========== Confirmation ==========

The Component Installation will use the following parameters to install the NR Extension Points component:

Home directory:/opt/CSCObpr

Data directory:/var/disk0/CSCObpr

NR extension point provisioning group:group1

Step 17 Press y and Enter to install the Network Registrar extensions. The program displays a message when the installation is complete.

 

 

Cisco Broadband Access Center for Cable Installation Guide 2.7

 

 

 

 

 

 

OL-19105-01

 

 

3-13

 

 

 

 

 

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Americas Headquarters Cisco Broadband Access Center for Cable Installation GuidePage N T E N T S Validating Extensions Setting Up Voice Technology OL-19105-01 How This Guide Is Organized AudienceThis chapter contains the following sections Section Title Description Document ConventionsRefer to these manuals for additional information Related DocumentationTo support the DPE-590 To support the DPE-2115OL-19105-01 JDK Patches for Solaris Operating System RequirementsHardware Requirements Network Registrar RequirementsKDC Patches Server Servers Server Class Processors Memory Min. #Min. # Recommended # Types of InstallationsBroadband Access Center for Cable Components Preparing to Install ComponentsItem Description Installation and Startup ProcessItem Description Item Description File System Block Size Broadband Access Center Database RequirementsThis example, the file system device is /dev/dsk/c0t0d0s4 Example output from the df command is as follows Installation ChecklistLarge File Support Installation Using the Graphical User Interface InstallationInstalling from the Command Line Preparing to Install Components Installation OL-19105-01 Installing Components Installing the Regional Distribution Unit Installing Extensions on a Network Registrar Server Installing Extensions Field Name Description Enter these commands to reload the Network Registrar serverValidating Extensions Example KDC Password Installing the Key Distribution CenterLocated Installing the Device Provisioning Engine Installing Components Using the CLIProgram then asks you to confirm the directory OL-19105-01 Installing Network Registrar Extensions Is this correct y/n/q/? yes y ACME.COM Installing the Key Distribution Center Installing Components Installing Components Using the CLI Installing the Device Provisioning Engine Installing Components Installing Components Using the CLI OL-19105-01 Installing in a Lab Environment Installing in a Lab Environment Using the GUI Installing in a Lab Environment Using the CLI KDC Fqdn Dhcp Interface Cable3/0 Ip address 192.168.5.0 Configuring Network Registrar and a CmtsIp dhcp relay information option OL-19105-01 Enabling a Network Registrar Spoofing DNS Server Post-Installation ActivitiesSave and close the /etc/syslog.conf file Uninstalling Broadband Access CenterSyslog is now ready to receive alerts from Bacc Uninstalling Bacc from the Console Mode Uninstalling Bacc from the Graphical User InterfacePress Enter to exit the program Following is displayedSolaris DPE DPE-590 DPE-2115 Appliance VersionUpgrading the RDU Before You BeginUpgrading the Solaris DPE # pkgparam CSCObpr Version Upgrading Hardware DPEs Upgrading Network Registrar Extensions Installed before you start the Bacc agentUpgrading the KDC Migrating from Bacc Migrating the RDU DatabaseMigrateDb.sh tempdir When running this script, use this syntaxOL-19105-01 Connecting the Device Provisioning Engine Hardware DPE Setup SequenceTo do this See this section System displays this user mode prompt Configuring and Running a Terminal Emulation ProgramLogging Configuring a Device Provisioning Engine for Data Configure the current time on the DPE. For example Setting Up Voice Technology Packetcable registration policy-privacy value Debugging Example show dpe command outputControls Available Setting Up a Device Provisioning Engine Debugging Configuration Scripts Network Registrar Configuration File ExampleWhere Identifies the username Identifies the password Sample Script for Docsis Modems and ComputersSample Script for Docsis Modems and PacketCable MTAs Solaris Broadband Access Center Administrator’s password Alert messages InstallationChoose Installation Type screen Command line interface Installing components CommandsInstallation Summary screen 3-3,3-7,3-8,4-3 Configuration management Documentation ConventionsOrganization Related documents Domain Name SystemKDC JRun process, detectingSetting up DPEs Installing BACSolaris
Top Page Image Contents