Cisco Systems Broadband Access Center Upgrading Network Registrar Extensions, Upgrading the KDC

Page 59
libbprextensions-2x.so

Chapter 6 Upgrading Broadband Access Center for Cable

Upgrading Network Registrar Extensions

Upgrading Network Registrar Extensions

Use this procedure to upgrade the Network Registrar extensions from BACC 2.5.0.2, or 2.6.x to BACC 2.7:

Step 1 Run the 27-upgrade-cnrep.sh script.

Step 2 Stop the Network Registrar Server Agent when prompted.

The upgrade script automatically copies the upgraded extension point files into the required directories. When complete, it prompts you to restart the Network Registrar Server Agent.

Step 3 Run this command to verify that the output indicates it is BACC release 2.7:

#pkgparam CSCObpr VERSION

The version information returned should be 2.7.

Step 4 Go to the /opt/CSCObpr/lib directory. Provided that the upgrade was successful, the directory content should appear similar to the list for the Solaris DPE upgrade with the addition of the

file.

Note The previous version of the file bpr.jar is renamed as bpr-2x.jar and is located in the <BACC_HOME>/lib directory.

Step 5 If a second check is required to verify upgrade success, go to the $CNR_HOME/extensions/dhcp/dex directory and verify that these files appear:

-rwxr-xr-x

1 root

bin 6

0904

Oct 29

2003

libdexextension.so

-rwxr-xr-x

1 root

other

1530628

Jul

22

12:43

libbprextensions-2x.so

-rwxr-xr-x

1 root

other

1560748

Aug

11

12:49

libbprextensions.s

Note The actual directory contents displayed in this procedure may differ, from those shown above, depending on the components installed on the computer.

Upgrading the KDC

 

Note

BACC 2.7 KDC requires a new license. Please ensure that the correct license and certificates are

 

 

installed before you start the BACC agent.

 

 

 

 

 

Use this procedure to upgrade the KDC from BACC 2.5.0.2 or 2.6.x to BACC 2.7:

 

 

 

 

Step 1

Run the 27-upgrade-KDC.sh script.

 

Step 2

Manually start the BACC agent to complete the upgrade process.

 

Step 3

Run this command to verify that the output indicates it is BACC release 2.7:

 

 

Cisco Broadband Access Center for Cable Installation Guide 2.7

 

 

 

 

 

 

 

 

 

 

 

 

OL-19105-01

 

 

6-5

 

 

 

 

 

Image 59
Contents Americas Headquarters Cisco Broadband Access Center for Cable Installation GuidePage N T E N T S Validating Extensions Setting Up Voice Technology OL-19105-01 This chapter contains the following sections AudienceHow This Guide Is Organized Section Title Description Document ConventionsTo support the DPE-2115 Related DocumentationRefer to these manuals for additional information To support the DPE-590OL-19105-01 JDK Patches for Solaris Operating System RequirementsKDC Patches Network Registrar RequirementsHardware Requirements Server Servers Server Class Processors Memory Min. #Min. # Recommended # Types of InstallationsBroadband Access Center for Cable Components Preparing to Install ComponentsItem Description Installation and Startup ProcessItem Description Item Description This example, the file system device is /dev/dsk/c0t0d0s4 Broadband Access Center Database RequirementsFile System Block Size Large File Support Installation ChecklistExample output from the df command is as follows Installation Using the Graphical User Interface InstallationInstalling from the Command Line Preparing to Install Components Installation OL-19105-01 Installing Components Installing the Regional Distribution Unit Installing Extensions on a Network Registrar Server Installing Extensions Field Name Description Enter these commands to reload the Network Registrar serverValidating Extensions Located Installing the Key Distribution CenterExample KDC Password Installing the Device Provisioning Engine Installing Components Using the CLIProgram then asks you to confirm the directory OL-19105-01 Installing Network Registrar Extensions Is this correct y/n/q/? yes y ACME.COM Installing the Key Distribution Center Installing Components Installing Components Using the CLI Installing the Device Provisioning Engine Installing Components Installing Components Using the CLI OL-19105-01 Installing in a Lab Environment Installing in a Lab Environment Using the GUI Installing in a Lab Environment Using the CLI KDC Fqdn Dhcp Interface Cable3/0 Ip address 192.168.5.0 Configuring Network Registrar and a CmtsIp dhcp relay information option OL-19105-01 Enabling a Network Registrar Spoofing DNS Server Post-Installation ActivitiesSyslog is now ready to receive alerts from Bacc Uninstalling Broadband Access CenterSave and close the /etc/syslog.conf file Uninstalling Bacc from the Console Mode Uninstalling Bacc from the Graphical User InterfacePress Enter to exit the program Following is displayedSolaris DPE DPE-590 DPE-2115 Appliance VersionUpgrading the Solaris DPE Before You BeginUpgrading the RDU # pkgparam CSCObpr Version Upgrading Hardware DPEs Upgrading the KDC Installed before you start the Bacc agentUpgrading Network Registrar Extensions Migrating from Bacc Migrating the RDU DatabaseMigrateDb.sh tempdir When running this script, use this syntaxOL-19105-01 To do this See this section Hardware DPE Setup SequenceConnecting the Device Provisioning Engine Logging Configuring and Running a Terminal Emulation ProgramSystem displays this user mode prompt Configuring a Device Provisioning Engine for Data Configure the current time on the DPE. For example Setting Up Voice Technology Packetcable registration policy-privacy value Controls Available Example show dpe command outputDebugging Setting Up a Device Provisioning Engine Debugging Sample Script for Docsis Modems and Computers Network Registrar Configuration File ExampleConfiguration Scripts Where Identifies the username Identifies the passwordSample Script for Docsis Modems and PacketCable MTAs Command line interface Installing components Commands Administrator’s password Alert messages InstallationSolaris Broadband Access Center Choose Installation Type screenRelated documents Domain Name System Configuration management Documentation ConventionsInstallation Summary screen 3-3,3-7,3-8,4-3 OrganizationKDC JRun process, detectingSolaris Installing BACSetting up DPEs