Cisco Systems Broadband Access Center Following is displayed, Press Enter to exit the program

Chapter 5 Post-Installation Activities

Uninstalling Broadband Access Center

Step 1 Log in as root.

Step 2 Manually remove the configuration of the BACC extensions on the Network Registrar server. You can do this from any server that has nrcmd installed and connectivity with Network Registrar. Follow these steps:

a.To uninstall the BACC extensions from your Network Registrar configuration, use these commands:

<NR_HOME>/usrbin/nrcmd -N admin -P changeme -b <

<BACC_HOME>/cnr_ep/bin/bpr_cnr_disable_extpts.nrcmd

b.To reload your DHCP server, use these commands:

/etc/init.d/nwreglocal stop

/etc/init.d/nwreglocal start

Alternatively, enter this command:

<NR_HOME>/usrbin/nrcmd -N admin -P changeme "dhcp reload"

c.To remove the BACC extensions from the Network Registrar extensions directory, use this command:

rm -f <NR_HOME>/extensions/dhcp/dex/libbprextensions.so

Step 3 At the CLI prompt, enter:

<BACC_HOME>/_uninst/uninstall.bin -console

The following is displayed:

Welcome to the Uninstallation Program

Press Enter to uninstall Cisco Broadband Provisioning Registrar from your system.

Press Enter to Continue or 'q' to Quit:

Step 4 Press Enter to start the removal process. When uninstallation is complete these messages appear:

Cisco Broadband Provisioning Registrar was Uninstalled

Cisco Broadband Provisioning Registrar files were uninstalled successfully.

Press Enter to finish:

Step 5 Press Enter to exit the program.

Cisco Broadband Access Center for Cable Installation Guide 2.7

5-4 OL-19105-01