Cisco Systems Broadband Access Center manual Installing in a Lab Environment Using the GUI

Page 44

Chapter 4 Installing in a Lab Environment

Installing in a Lab Environment Using the GUI

Installing in a Lab Environment Using the GUI

The lab installation prompts for this information:

•BACC destination directory

•Network Registrar administrator username and password

•Shared secret password

During a lab installation, a set of predetermined default values are used as a network configuration. To install BACC in a lab environment, complete these steps:

Step 1 Complete steps 1 through 4 in the “Installation Using the Graphical User Interface” section on page 2-7.Step 2 Click Lab when the Choose Installation Type screen appears.

Step 3 Click Next. The lab installation program automatically checks to see if it detects a TFTP server.

Caution When installing BACC on a Solaris server, both the Solaris and Network Registrar TFTP servers must be disabled.

Provided that a TFTP server is not detected, a PacketCable voice technology screen appears. Step 4 Determine if you need to install the voice technology option and click:

•Yes button if you want to install the voice technology option

•No if you do not have a valid license key for this technology.

Step 5 Click Next and the Destination Directory screen appears.

Step 6 Enter the pathname of the location where you want to install BACC.

Step 7 Click Next. The installation program verifies that the selected installation directory exists and, if it does not, prompts you to automatically create it. The installation program also confirms that the required disk space is available, and then the Cisco Network Registrar Username and Password screen appears.

Step 8 Enter the Network Registrar administrative username and password.

Step 9 Click Next. The Key Distribution Center Realm Name screen appears.

Step 10 If the default KDC realm name is inappropriate, enter desired KDC Realm, FQDN, and interface address name.

Step 11 Click Next. The PacketCable Properties screen appears.

Note If you did not select the voice technology option from the PacketCable Panel, this screen will not appear.

Step 12 Enter the appropriate information into the fields shown.

Cisco Broadband Access Center for Cable Installation Guide 2.7

4-2	OL-19105-01

Image 44

Contents Cisco Broadband Access Center for Cable Installation Guide Americas HeadquartersPage N T E N T S Validating Extensions Setting Up Voice Technology OL-19105-01 This chapter contains the following sections AudienceHow This Guide Is Organized Document Conventions Section Title DescriptionRelated Documentation Refer to these manuals for additional informationTo support the DPE-590 To support the DPE-2115OL-19105-01 Operating System Requirements JDK Patches for SolarisKDC Patches Network Registrar RequirementsHardware Requirements Min. # Server Servers Server Class Processors MemoryTypes of Installations Min. # Recommended #Preparing to Install Components Broadband Access Center for Cable ComponentsInstallation and Startup Process Item DescriptionItem Description Item Description This example, the file system device is /dev/dsk/c0t0d0s4 Broadband Access Center Database RequirementsFile System Block Size Large File Support Installation ChecklistExample output from the df command is as follows Installation Installation Using the Graphical User InterfaceInstalling from the Command Line Preparing to Install Components Installation OL-19105-01 Installing Components Installing the Regional Distribution Unit Installing Extensions on a Network Registrar Server Installing Extensions Enter these commands to reload the Network Registrar server Field Name DescriptionValidating Extensions Located Installing the Key Distribution CenterExample KDC Password Installing Components Using the CLI Installing the Device Provisioning EngineProgram then asks you to confirm the directory OL-19105-01 Installing Network Registrar Extensions Is this correct y/n/q/? yes y ACME.COM Installing the Key Distribution Center Installing Components Installing Components Using the CLI Installing the Device Provisioning Engine Installing Components Installing Components Using the CLI OL-19105-01 Installing in a Lab Environment Installing in a Lab Environment Using the GUI Installing in a Lab Environment Using the CLI KDC Fqdn Dhcp Configuring Network Registrar and a Cmts Interface Cable3/0 Ip address 192.168.5.0Ip dhcp relay information option OL-19105-01 Post-Installation Activities Enabling a Network Registrar Spoofing DNS ServerSyslog is now ready to receive alerts from Bacc Uninstalling Broadband Access CenterSave and close the /etc/syslog.conf file Uninstalling Bacc from the Graphical User Interface Uninstalling Bacc from the Console ModeFollowing is displayed Press Enter to exit the programAppliance Version Solaris DPE DPE-590 DPE-2115Upgrading the Solaris DPE Before You BeginUpgrading the RDU # pkgparam CSCObpr Version Upgrading Hardware DPEs Upgrading the KDC Installed before you start the Bacc agentUpgrading Network Registrar Extensions Migrating the RDU Database Migrating from BaccWhen running this script, use this syntax MigrateDb.sh tempdirOL-19105-01 To do this See this section Hardware DPE Setup SequenceConnecting the Device Provisioning Engine Logging Configuring and Running a Terminal Emulation ProgramSystem displays this user mode prompt Configuring a Device Provisioning Engine for Data Configure the current time on the DPE. For example Setting Up Voice Technology Packetcable registration policy-privacy value Controls Available Example show dpe command outputDebugging Setting Up a Device Provisioning Engine Debugging Network Registrar Configuration File Example Configuration ScriptsWhere Identifies the username Identifies the password Sample Script for Docsis Modems and ComputersSample Script for Docsis Modems and PacketCable MTAs Administrator’s password Alert messages Installation Solaris Broadband Access CenterChoose Installation Type screen Command line interface Installing components CommandsConfiguration management Documentation Conventions Installation Summary screen 3-3,3-7,3-8,4-3Organization Related documents Domain Name SystemJRun process, detecting KDCSolaris Installing BACSetting up DPEs