Cisco Systems Broadband Access Center manual OL-19105-01

Page 34

Chapter 3 Installing Components

Installing Components Using the CLI

Step 8 Press y and Enter to continue. The program prompts you to enter the database transaction logs destination.

Step 9 To accept the default directory, /var/CSCObpr, press Enter; or enter another directory. For example:

Database Transaction Logs Destination

Logs Directory Destination

Logs Directory Destination [/var/CSCObpr] /var/disk1/CSCObpr

The program then asks you to confirm the directory.

Note By default, the installation program installs the database transaction logs directory (BPR_DBLOG) in the same directory as the data directory (BPR_DATA). Cisco Systems recommends that you locate the database transaction logs directory on the fastest disk on the system and that you ensure that the disk has 1 GB of space available.

The directory specified becomes the top-level directory under which the installation program creates a number of subdirectories.

Step 10 Press y and Enter to continue. The program prompts you to enter the listening port for the RDU. Step 11 To accept the default value, 49187, press Enter; or enter another port number. For example:

Regional Distribution Unit Host/Port

Enter the IP address and the listening port of the regional distribution unit(RDU)associated with this installation.

Enter the Host/IP address and address of the listening port for the RDU and RDU Listening Port [49187]

Note The installation program obtains the IP address of the RDU automatically. You do not need to enter this value.

The program then prompts you to confirm the listening port number.

Note The RDU listens on all interfaces. The listening port is the port number that the RDU uses to communicate with other BACC components, such as DPEs and Network Registrar extension points.

Step 12 Press y and Enter to continue. The program prompts you to enter the shared secret password.

Note You must use the same shared secret password for all RDUs, DPEs, and Network Registrar extension points in your network. The default password is secret.

Step 13 Enter the password that you want to use for authentication among BACC servers. For example:

Shared Secret Password

Enter the password to be used for authentication among the BPR servers.

	Cisco Broadband Access Center for Cable Installation Guide 2.7
3-10	OL-19105-01

Image 34

Contents Cisco Broadband Access Center for Cable Installation Guide Americas HeadquartersPage N T E N T S Validating Extensions Setting Up Voice Technology OL-19105-01 How This Guide Is Organized AudienceThis chapter contains the following sections Document Conventions Section Title DescriptionTo support the DPE-590 Related DocumentationRefer to these manuals for additional information To support the DPE-2115OL-19105-01 Operating System Requirements JDK Patches for SolarisHardware Requirements Network Registrar RequirementsKDC Patches Min. # Server Servers Server Class Processors MemoryTypes of Installations Min. # Recommended #Preparing to Install Components Broadband Access Center for Cable ComponentsInstallation and Startup Process Item DescriptionItem Description Item Description File System Block Size Broadband Access Center Database RequirementsThis example, the file system device is /dev/dsk/c0t0d0s4 Example output from the df command is as follows Installation ChecklistLarge File Support Installation Installation Using the Graphical User InterfaceInstalling from the Command Line Preparing to Install Components Installation OL-19105-01 Installing Components Installing the Regional Distribution Unit Installing Extensions on a Network Registrar Server Installing Extensions Enter these commands to reload the Network Registrar server Field Name DescriptionValidating Extensions Example KDC Password Installing the Key Distribution CenterLocated Installing Components Using the CLI Installing the Device Provisioning EngineProgram then asks you to confirm the directory OL-19105-01 Installing Network Registrar Extensions Is this correct y/n/q/? yes y ACME.COM Installing the Key Distribution Center Installing Components Installing Components Using the CLI Installing the Device Provisioning Engine Installing Components Installing Components Using the CLI OL-19105-01 Installing in a Lab Environment Installing in a Lab Environment Using the GUI Installing in a Lab Environment Using the CLI KDC Fqdn Dhcp Configuring Network Registrar and a Cmts Interface Cable3/0 Ip address 192.168.5.0Ip dhcp relay information option OL-19105-01 Post-Installation Activities Enabling a Network Registrar Spoofing DNS ServerSave and close the /etc/syslog.conf file Uninstalling Broadband Access CenterSyslog is now ready to receive alerts from Bacc Uninstalling Bacc from the Graphical User Interface Uninstalling Bacc from the Console ModeFollowing is displayed Press Enter to exit the programAppliance Version Solaris DPE DPE-590 DPE-2115Upgrading the RDU Before You BeginUpgrading the Solaris DPE # pkgparam CSCObpr Version Upgrading Hardware DPEs Upgrading Network Registrar Extensions Installed before you start the Bacc agentUpgrading the KDC Migrating the RDU Database Migrating from BaccWhen running this script, use this syntax MigrateDb.sh tempdirOL-19105-01 Connecting the Device Provisioning Engine Hardware DPE Setup SequenceTo do this See this section System displays this user mode prompt Configuring and Running a Terminal Emulation ProgramLogging Configuring a Device Provisioning Engine for Data Configure the current time on the DPE. For example Setting Up Voice Technology Packetcable registration policy-privacy value Debugging Example show dpe command outputControls Available Setting Up a Device Provisioning Engine Debugging Where Identifies the username Identifies the password Network Registrar Configuration File ExampleConfiguration Scripts Sample Script for Docsis Modems and ComputersSample Script for Docsis Modems and PacketCable MTAs Choose Installation Type screen Administrator’s password Alert messages InstallationSolaris Broadband Access Center Command line interface Installing components CommandsOrganization Configuration management Documentation ConventionsInstallation Summary screen 3-3,3-7,3-8,4-3 Related documents Domain Name SystemJRun process, detecting KDCSetting up DPEs Installing BACSolaris