Cisco Systems Broadband Access Center manual Field Name Description

Page 29

Chapter 3 Installing Components

Installing Components Using the Graphical User Interface

Field Name	Description

Kerberos Realm Name	Specifies, using a unique name, the Kerberos realm. This must match the
	realm set at the associated components.

IP Address of Primary	Specifies the IP address of the voice technology primary DHCP server.
DHCP Server

IP Address of Primary DNS	Specifies the IP address of the computer which is running the primary
Server	DNS server.

IP Address of Secondary	Specifies the IP address of the voice technology secondary DHCP server.
DHCP Server

IP Address of Secondary	Specifies the IP address of the computer which is running the secondary
DNS Server	DNS server; if that server is being used.

Step 12 Click Next. The Shared Secret Password screen appears.

Step 13 Enter and confirm the shared secret password.

Note Use the shared secret password specified during the RDU installation.

Step 14 Click Next. The Installation Parameters screen appears. This screen identifies the values that you have entered in the previous screens. To modify any of the values entered click Back until the desired screen appears.

Step 15 Click Next. When the installation is complete, the Installed Components Summary screen appears. Click Finish to exit the installation program.

Configuring Extensions

After you install the BACC extensions to Network Registrar, you must configure the extensions. The procedure described in this section makes these assumptions:

•The BACC component is installed in /opt/CSCObpr.

•Network Registrar is installed in /opt/nwreg2.

•The Network Registrar username is admin and the password is changeme. To configure extensions, follow these steps:

Step 1 Log in as root to the Network Registrar server.

Step 2 At the command line, enter these commands:

<NR_HOME>/usrbin/nrcmd -N admin -P changeme -b < <BACC_HOME>/cnr_ep/bin/bpr_cnr_enable_extpts.nrcmd

Step 3 Enter these commands to reload the Network Registrar server:

/etc/init.d/nwreglocal stop

/etc/init.d/nwreglocal start

Alternatively, you can enter this command to reload the DHCP server alone:

Cisco Broadband Access Center for Cable Installation Guide 2.7

	OL-19105-01	3-5

Image 29

Contents Americas Headquarters Cisco Broadband Access Center for Cable Installation GuidePage N T E N T S Validating Extensions Setting Up Voice Technology OL-19105-01 This chapter contains the following sections AudienceHow This Guide Is Organized Section Title Description Document ConventionsRefer to these manuals for additional information Related DocumentationTo support the DPE-590 To support the DPE-2115OL-19105-01 JDK Patches for Solaris Operating System RequirementsKDC Patches Network Registrar RequirementsHardware Requirements Server Servers Server Class Processors Memory Min. #Min. # Recommended # Types of InstallationsBroadband Access Center for Cable Components Preparing to Install ComponentsItem Description Installation and Startup ProcessItem Description Item Description This example, the file system device is /dev/dsk/c0t0d0s4 Broadband Access Center Database RequirementsFile System Block Size Large File Support Installation ChecklistExample output from the df command is as follows Installation Using the Graphical User Interface InstallationInstalling from the Command Line Preparing to Install Components Installation OL-19105-01 Installing Components Installing the Regional Distribution Unit Installing Extensions on a Network Registrar Server Installing Extensions Field Name Description Enter these commands to reload the Network Registrar serverValidating Extensions Located Installing the Key Distribution CenterExample KDC Password Installing the Device Provisioning Engine Installing Components Using the CLIProgram then asks you to confirm the directory OL-19105-01 Installing Network Registrar Extensions Is this correct y/n/q/? yes y ACME.COM Installing the Key Distribution Center Installing Components Installing Components Using the CLI Installing the Device Provisioning Engine Installing Components Installing Components Using the CLI OL-19105-01 Installing in a Lab Environment Installing in a Lab Environment Using the GUI Installing in a Lab Environment Using the CLI KDC Fqdn Dhcp Interface Cable3/0 Ip address 192.168.5.0 Configuring Network Registrar and a CmtsIp dhcp relay information option OL-19105-01 Enabling a Network Registrar Spoofing DNS Server Post-Installation ActivitiesSyslog is now ready to receive alerts from Bacc Uninstalling Broadband Access CenterSave and close the /etc/syslog.conf file Uninstalling Bacc from the Console Mode Uninstalling Bacc from the Graphical User InterfacePress Enter to exit the program Following is displayedSolaris DPE DPE-590 DPE-2115 Appliance VersionUpgrading the Solaris DPE Before You BeginUpgrading the RDU # pkgparam CSCObpr Version Upgrading Hardware DPEs Upgrading the KDC Installed before you start the Bacc agentUpgrading Network Registrar Extensions Migrating from Bacc Migrating the RDU DatabaseMigrateDb.sh tempdir When running this script, use this syntaxOL-19105-01 To do this See this section Hardware DPE Setup SequenceConnecting the Device Provisioning Engine Logging Configuring and Running a Terminal Emulation ProgramSystem displays this user mode prompt Configuring a Device Provisioning Engine for Data Configure the current time on the DPE. For example Setting Up Voice Technology Packetcable registration policy-privacy value Controls Available Example show dpe command outputDebugging Setting Up a Device Provisioning Engine Debugging Configuration Scripts Network Registrar Configuration File ExampleWhere Identifies the username Identifies the password Sample Script for Docsis Modems and ComputersSample Script for Docsis Modems and PacketCable MTAs Solaris Broadband Access Center Administrator’s password Alert messages InstallationChoose Installation Type screen Command line interface Installing components CommandsInstallation Summary screen 3-3,3-7,3-8,4-3 Configuration management Documentation ConventionsOrganization Related documents Domain Name SystemKDC JRun process, detectingSolaris Installing BACSetting up DPEs