Cisco Systems Broadband Access Center manual Validating Extensions

Chapter 3 Installing Components

Installing Components Using the Graphical User Interface

<NR_HOME>/usrbin/nrcmd -N admin -P changeme "dhcp reload"

Caution Be aware that you also must configure client-classes, scope selection tags, policies, and scopes before you can use the Network Registrar server. See the Network Registrar User’s Guide for information about configuring these entities.

Validating Extensions

In the nrcmd program, run the following command and verify the output is the same:

nrcmd> extension list

100Ok dexdropras:

entry = dexdropras

file = libdexextension.so init-args =

init-entry = lang = Dex

preClientLookup:

entry = bprClientLookup file = libbprextensions.so

init-args = BACC_HOME=/opt/CSCObpr,BACC_DATA=/var/CSCObpr init-entry = bprInit

lang = Dex prePacketEncode:

entry = bprExecuteExtension file = libbprextensions.so init-args =

init-entry = lang = Dex

Note The <BACC_HOME> and <BACC_DATA> values may be different in your installation.

Also in the nrcmd program, run the following command and verify the output is the same:

nrcmd> dhcp listextensions 100 Ok post-packet-decode: dexdropras

pre-packet-encode: prePacketEncode

pre-client-lookup: preClientLookup post-client-lookup: post-send-packet: pre-dns-add-forward: check-lease-acceptable:

Cisco Broadband Access Center for Cable Installation Guide 2.7

3-6 OL-19105-01