Extron electronic ISM 482 manual User Presets menu, Save Preset submenu

User Presets menu

Figure 21 is a flowchart that shows an overview of the User Presets menu, the Save Preset and Erase Preset submenus, and the available settings.

	Default
	Cycle
	Menu
	10 sec.
	Video & Audio
	Configuration
	Menu
	Output
	Configuration
	Menu
	Advanced
	Configuration
	Menu
	User Presets	Next
	Menu
Menu	Exit Menu
	Press Next to Exit
	Next

NOTE: To save a preset for the	NOTE: To erase a preset for the
second output after saving the	second output after erasing the
preset for the first, start over	preset for the first, start over
from the default cycle.	from the default cycle.

1					10 sec.				10 sec.
		Save Out #2 Preset			1	Erase Out #1 Preset
OUTPUTS If necessary,					Next				Menu
		<N/A>	1	2	3	<N/A>	1	2	3
	select the				OUTPUTS	If necessary,
2	unselected					select the			Next
	output.					unselected
					2
						output.
		Use either Adjust knob				Use either Adjust knob
		to select a preset or no				to select a preset or no
		preset (N/A). Press Next.				preset (N/A). Press Next.

Figure 21. User Presets Menu Flowchart

Save Preset submenu

Select the output with the settings that you want to save as a preset by pressing the desired Output button.

Rotate either the Adjust or the Adjust knob while in the Save Preset submenu to highlight (< >) one of three memory presets for the selected output or highlight N/A for no preset. Press the Next button to save the current settings to the selected preset. Select N/A and press the Next button to exit without saving the settings.

Presets are saved sets of values for the current color, tint, contrast, brightness, detail, sizing, and centering settings. Presets saved in nonvolatile memory; when the ISM is powered down and later powered back up, the settings are available for selection. Saving the settings to a preset number overwrites the settings previously written to that preset number.

NOTE: The color, tint, contrast, brightness, detail, sizing, and centering adjustments are tailored for the selected output rate. If you change the output rate and then recall a preset for the earlier rate, the adjustments recalled in the preset have

no effect on the video output. However, if you then change back to the earlier output rate, the effects of the adjustments appear on the screen if they were not overwritten for the old output rate.

ISM 482 Integrated Scaling Matrix Switcher • Operation 23