Command and Response Table for Advanced Instruction Set Commands
The advanced instruction set consists of four hexadecimal commands for uploading and downloading all or a portion of the memory of the switcher. These commands are for use by knowledgeable programmers, and result in a dump of data from (upload) or to (download) the switcher. Programmers can use the commands to exactly duplicate the settings among switchers with a minimum of effort.
Command Function | SIS Command | Response | Additional description |
| (Host to Unit) | (Unit to Host) |
|
Memory backup
Read all memory contents | 90 91 | {8226 data bytes+1 byte |
|
| checksum} |
Write all memory contents | 90 92+8226 data bytes+1 byte checksum | |
|
| Dn1] |
Read partial contents | X@90 93 | {26 data bytes+1 byte |
|
| checksum} |
Write partial contents | X@90 94+26 data bytes+1 byte checksum | |
|
| Dn1] |
Upload (switcher to control device) all color, tint, contrast, brightness, detail, sizing, and centering settings; all user presets; and all auto memories for all inputs and both outputs
Download (control device to switcher) all color, tint, contrast, brightness, detail, sizing, and centering settings; all user presets; and all auto memories for all inputs and both outputs.
Upload (switcher to control device) color, tint, contrast, brightness, detail, sizing, and centering settings; all user presets; and all auto memories for the input selected for output X@.
Download (control device to switcher) color, tint, contrast, brightness, detail, sizing, and centering settings; all user presets; and all auto memories for the input selected for output X@.
ISM 482 Integrated Scaling Matrix Switcher • Programming Guide 46