ATTO Technology FastStream VT, 5300 Begin initial configuration, Click on Launch Browser

Page 11

•The switch(es) allows UDP broadcast messages to be passed through.

•A router is not placed between the host running QuickNav and the FastStream VT 5300.

•You have connected the FastStream VT 5300 and the network using at least Cat5e cabling.

•You have noted the FastStream VT 5300 serial number from the bottom of the unit.

Note

The FastStream VT 5300 is initially configured with DHCP enabled. It is best if you have access to a DHCP server.

1Work from the computer attached to the FastStream VT 5300 Ethernet port on the same broadcast domain. From the CD supplied with your FastStream, run the QuickNav Utility QuickNAV-windows.exefor Windows or QuickNAV-Macfor Mac OS X.

2Locate the FastStream with the serial number recorded earlier.

3Highlight the serial number.

4Click Next.

If a DHCP server is available on your network, an address is assigned automatically by the server. Note the assigned address:

_________________________________

____

If you do not have a DHCP server, get an IPaddress and subnet mask from your network administrator, type it into the area provided, and select Next.

5Click on Launch Browser

Your browser points to the FastStream VT 5300 splash screen.

Begin initial configuration

1The FastStream GUI welcome screen appears. Click on Enter Here

2Type in the username and password.

Note

The default username is root; it is case insensitive. The default password is Password; it is case sensitive. It is best practice to change the passwords. Refer to Optional changes to system parameters on page 11.

3The Initial Setup page appears.

Before creating a Virtual Tape Library, you may wish to initialize and verify your drives to ensure drive integrity. Refer to Initialize and verify drives on page 17.

CAUTION

Selecting Drive Initialization causes all previous storage data on the drive to be erased. Make sure all of your information is backed up before initializing drives.

4Go on to Configure Virtual Tape on page 7.

Exhibit 2.0-1 General bracket assembly.

6

Image 11

Contents FastStream VT Page Page Contents Interface options Update storage and firmwareAppendix E Warranty, contact information Xxi Modify storageManagement and control features Hardware featuresVirtual Tape features Backup and restore featuresGbE network Gb FC Switch GbE SwitchEthernet Fibre Channel Physical attributes Installation Install Windows drivers InstallationUnpack the packing box verify contents Install the FastStreamClick on Launch Browser Begin initial configurationConfigure Virtual Tape Use custom initial setup Use quick initial configurationClick on the Add/Remove Hot Spares button Use Hot Spare devicesMove Virtual Tape Cartridges Click in the Enable/Disable Write Protection buttonEnable/Disable Write Protection page appears Secure data through Write ProtectionOptional changes to system parameters Customize the username, passwordChange system configurations Advanced CLI Changes to other parameters may be made using the AdvancedMonitor VTL Monitor storage and diagnose configurationsPhone home E-mail messages Configuration DisplayHealth and Status Monitor Measure drive performance Click the Set up Error Notification buttonConfiguration Select Verify Only Scan drive surfacesVerify storage Click the Initialize and Verify buttonAdd drives to a RAID Group Modify storageInitialize and verify drives Select the Add/Remove Hot Spares button Rebuild RAID GroupsAdd or remove Hot Spares Select Rebuild RAID GroupsClick in the Delete Virtual Tape Library button Add a VTL from another FastStream VTLDelete a VTL Move Virtual Tape Cartridges Preliminary steps Update storage and firmwareRemove stale VTL configuration data Update firmwareClick Send File Use FTP over EthernetUse the RS-232 serial link Send FileType FastStream VT 5300 in the New Connection dialog box Interface optionsUse the serial port Enter Use TelnetCable types Appendix a CablingScsi cabling Cable length Fibre Channel connectionsDisk Appendix B Designing RAID groupsJbod Just a Bunch of Disks RAID LevelIv Appendix Appendix C CLI provides an ASCII-based interface Symbol IndicatesMp1 CLI error messagesCLI summary Command Default ExampleViii Appendix Sntp CLI command explanations DumpConfig DefaultInterleaveDHCPFixedDelay DriveTestConfigEmailUsername EmailPasswordEmailNotifyAddress EmailServerAddressFCHardAddress FCPortErrorsFCDataRate FCHardIsReserved PasswordIPGateway IPSubnetMaskRGCancelAddStorage RAIDCommandTimeoutResetFCPortErrors RestoreConfigurationRGHaltRebuild RGWaitTimeoutRGDisplay RGHaltConversionRMStatus SaveConfigurationSCSIPortReset SCSIPortResetOnStartupTailEventLog SerialPortBaudRateSerialPortEcho SNTPServerThis equipment generates, uses, and can radiate radio Further results of FCC TestingAppendix D Standards and compliances Declaration of Conformity European StandardsContact Atto Technology, Inc Appendix E Warranty, contact informationManufacturer limited warranty Xxii Appendix