ATTO Technology 5300 operation manual Add a VTL from another FastStream VTL, Delete a VTL

Page 24

Add a VTL from another FastStream VTL

If you want one FastStream VT 5300 to recognize a library from another FastStream device, the FastStream VT 5300 must discover it through mapping. When you created your first library, the media changer and tape drive LUNs are mapped automatically to one of two ports. A second library is mapped to the other port.

Note

The FastStream VT 5300 supports two libraries, one on each port.

1If you are not already in the FastStream GUI, type the IP address of your appliance, as found

in Use the FastStream VT 5300 GUI on page 23, in a standard browser, click Enter Here and type in your username and password.

2Click on the Advanced button.

3In the text box provided type AutoMap.

4Click on Submit.

5When Ready* is displayed in the screen below, type SaveConfiguration.

6Click on Submit.

7Click on the VTL menu item on the left hand side of the screen.

8The Monitor VTL page appears. A tab for the library you just added is displayed.

Delete a VTL

1If you are not already in the FastStream GUI, type the IP address of your appliance, as found in Use the FastStream VT 5300 GUI on page 23, in a standard browser, click Enter Here and type in your username and password.

2The Monitor VTL page appears. On the menu at the left hand side of the page, choose Manage.

3The Manage VTL page appears. Choose the Virtual Tape Libraries arrow.

4Click in the Delete Virtual Tape Library button.

5Click on Next.

6Click on radio box displaying the name of library.

7Click Commit

8In the warning box, verify that you want to delete the VTL by clicking on Yes. Clicking on No ends the procedure without making a change.

9After the process completes, the VTL Monitor page appears

Secure data through Write Protection

For added security, write protection can be enabled for any tape cartridge with a VTL. When write protection is enabled, existing data on the tape cartridge cannot be overwritten or erased.

The displayed data can be sorted by any field by clicking on the heading for the field; clicking twice reverses the sort order.

1If you are not already in the FastStream GUI, type the IP address of your appliance, as found in Use the FastStream VT 5300 GUI on page 23, in a standard browser, click Enter Here and type in your username and password.

2The Monitor VTL page appears. On the menu at the left hand side of the page, choose Manage.

3The Manage VTL page appears. Choose the Virtual Tape Libraries arrow.

4Click in the Enable/Disable Write Protection button.

5Click on Next.

6Click on the tab with the name of the VTL for which you wish to change write protection.

7Click in the radio box to change the write protection level for that VTL.

8Click Commit.

9A warning box appears. If you wish to proceed, click on Yes. Clicking on No ends the procedure without making a change.

10The Enable/Disable Write Protection page appears.

If you wish to protect elements in another library, select the library and repeat this procedure.

19

ATTO Technology Inc. FastStream VT 5300 Installation and Operation Manual

Image 24
Contents FastStream VT Page Page Contents Update storage and firmware Appendix E Warranty, contact information XxiModify storage Interface optionsHardware features Virtual Tape featuresBackup and restore features Management and control featuresGb FC Switch GbE Switch Ethernet Fibre ChannelGbE network Physical attributes Installation Installation Unpack the packing box verify contentsInstall the FastStream Install Windows driversBegin initial configuration Click on Launch BrowserConfigure Virtual Tape Use quick initial configuration Use custom initial setupUse Hot Spare devices Click on the Add/Remove Hot Spares buttonClick in the Enable/Disable Write Protection button Enable/Disable Write Protection page appearsSecure data through Write Protection Move Virtual Tape CartridgesCustomize the username, password Change system configurationsOptional changes to system parameters Changes to other parameters may be made using the Advanced Advanced CLIMonitor storage and diagnose configurations Monitor VTLConfiguration Display Health and Status MonitorPhone home E-mail messages Click the Set up Error Notification button ConfigurationMeasure drive performance Scan drive surfaces Verify storageClick the Initialize and Verify button Select Verify OnlyModify storage Initialize and verify drivesAdd drives to a RAID Group Rebuild RAID Groups Add or remove Hot SparesSelect Rebuild RAID Groups Select the Add/Remove Hot Spares buttonAdd a VTL from another FastStream VTL Delete a VTLClick in the Delete Virtual Tape Library button Move Virtual Tape Cartridges Update storage and firmware Remove stale VTL configuration dataUpdate firmware Preliminary stepsUse FTP over Ethernet Use the RS-232 serial linkSend File Click Send FileInterface options Use the serial portType FastStream VT 5300 in the New Connection dialog box Use Telnet EnterAppendix a Cabling Scsi cablingCable types Fibre Channel connections Cable lengthAppendix B Designing RAID groups Jbod Just a Bunch of DisksRAID Level DiskIv Appendix Symbol Indicates Appendix C CLI provides an ASCII-based interfaceCLI error messages Mp1Command Default Example CLI summaryViii Appendix Sntp CLI command explanations DefaultInterleave DHCPFixedDelayDriveTestConfig DumpConfigEmailPassword EmailNotifyAddressEmailServerAddress EmailUsernameFCPortErrors FCDataRateFCHard FCHardAddressPassword IPGatewayIPSubnetMask IsReservedRAIDCommandTimeout ResetFCPortErrorsRestoreConfiguration RGCancelAddStorageRGWaitTimeout RGDisplayRGHaltConversion RGHaltRebuildSaveConfiguration SCSIPortResetSCSIPortResetOnStartup RMStatusSerialPortBaudRate SerialPortEchoSNTPServer TailEventLogFurther results of FCC Testing Appendix D Standards and compliancesThis equipment generates, uses, and can radiate radio European Standards Declaration of ConformityAppendix E Warranty, contact information Manufacturer limited warrantyContact Atto Technology, Inc Xxii Appendix