ATTO Technology FastStream VT, 5300 operation manual CLI error messages, Mp1

Page 35

Symbol	Indicates

mp1	Ethernet port used to manage the FastStream VT 5300

BlockDevID	index designation of a block device not assigned to any other RAID Group

cap	capacity of the block device

DevIndex	index designation of the RAID member

GroupName	ASCII name of a RAID Group

grpName	the name of the RAID Group to which the block device is assigned, or blank if the
	block device is available

id	index designation of a block device

ileave	interleave of RAID Group in blocks

mem	number of RAID members in the RAID Group

MemberIndex	index designation of a RAID Group member

numLines	number of output lines to follow

prodId	16-character ASCII SCSI product ID of the RAID member

rebuildStatus	rebuild status: OK, INPROGRESS, FAULTED or HALTED

rev or rv	4-character ASCII Revision string of the RAID member

serNum	least significant 16 digits of the RAID member’s serial number

stat or status	current RAID Group status--NEW, ONLINE, DEGRADED, WAITING, or OFFLINE

type	RAID Group type: JBOD, RAID0, RAID1, or RAID10

vId or vendid	8-character ASCII SCSI vendor ID of the RAID member

CLI error messages

The following error messages may be returned by the Command line Interface

ERROR. Invalid Command. Type 'Help' for command list.

ERROR. Wrong/Missing Parameters

Usage: <usage string>

ERROR Invalid RAID Group state

ERROR Invalid Block Device index

ERROR Invalid RAID Member index

ERROR Maximum number of RAID Groups exceeded

ERROR Insufficient number of RAID Group members

ERROR

Block Device at specified index no longer available

ERROR Insufficient RAID Group members for RAID type

vi Appendix

Image 35

Contents FastStream VT Page Page Contents Interface options Update storage and firmwareAppendix E Warranty, contact information Xxi Modify storageManagement and control features Hardware featuresVirtual Tape features Backup and restore featuresGbE network Gb FC Switch GbE SwitchEthernet Fibre Channel Physical attributes Installation Install Windows drivers InstallationUnpack the packing box verify contents Install the FastStreamClick on Launch Browser Begin initial configurationConfigure Virtual Tape Use custom initial setup Use quick initial configurationClick on the Add/Remove Hot Spares button Use Hot Spare devicesMove Virtual Tape Cartridges Click in the Enable/Disable Write Protection buttonEnable/Disable Write Protection page appears Secure data through Write ProtectionOptional changes to system parameters Customize the username, passwordChange system configurations Advanced CLI Changes to other parameters may be made using the AdvancedMonitor VTL Monitor storage and diagnose configurationsPhone home E-mail messages Configuration DisplayHealth and Status Monitor Measure drive performance Click the Set up Error Notification buttonConfiguration Select Verify Only Scan drive surfacesVerify storage Click the Initialize and Verify buttonAdd drives to a RAID Group Modify storageInitialize and verify drives Select the Add/Remove Hot Spares button Rebuild RAID GroupsAdd or remove Hot Spares Select Rebuild RAID GroupsClick in the Delete Virtual Tape Library button Add a VTL from another FastStream VTLDelete a VTL Move Virtual Tape Cartridges Preliminary steps Update storage and firmwareRemove stale VTL configuration data Update firmwareClick Send File Use FTP over EthernetUse the RS-232 serial link Send FileType FastStream VT 5300 in the New Connection dialog box Interface optionsUse the serial port Enter Use TelnetCable types Appendix a CablingScsi cabling Cable length Fibre Channel connectionsDisk Appendix B Designing RAID groupsJbod Just a Bunch of Disks RAID LevelIv Appendix Appendix C CLI provides an ASCII-based interface Symbol IndicatesMp1 CLI error messagesCLI summary Command Default ExampleViii Appendix Sntp CLI command explanations DumpConfig DefaultInterleaveDHCPFixedDelay DriveTestConfigEmailUsername EmailPasswordEmailNotifyAddress EmailServerAddressFCHardAddress FCPortErrorsFCDataRate FCHardIsReserved PasswordIPGateway IPSubnetMaskRGCancelAddStorage RAIDCommandTimeoutResetFCPortErrors RestoreConfigurationRGHaltRebuild RGWaitTimeoutRGDisplay RGHaltConversionRMStatus SaveConfigurationSCSIPortReset SCSIPortResetOnStartupTailEventLog SerialPortBaudRateSerialPortEcho SNTPServerThis equipment generates, uses, and can radiate radio Further results of FCC TestingAppendix D Standards and compliances Declaration of Conformity European StandardsContact Atto Technology, Inc Appendix E Warranty, contact informationManufacturer limited warranty Xxii Appendix