Tripp Lite 350, 525 owner manual Mounting Rack, Post Mounting

Page 4

200310077 93-2200 Sinewave SmartPro Rackmount UPS Owner’s Manual.qxd 10/21/2003

3:32 PM Page 3

Mounting (Rack)

Mount your equipment in either a 4-post or 2-post rack or rack enclosure (see next page for 2-post mounting). The user must determine the fitness of hardware and procedures before mounting. If hardware and procedures are not suitable for your application, contact the manufacturer of your rack or rack enclosure. The procedures described in this manual are for common rack and rack enclosure types and may not be appropriate for all applications.

4-Post Mounting

All UPS models include hardware required to mount in a 4-post rack. Select models include an adjustable rackmount shelf kit to provide additional support. If your UPS model does not include an adjustable rackmount shelf kit, skip steps 1 and 2.

1Connect the two segments of each shelf A using the included screws and nuts B . Leave the screws slightly loose so that the shelves can be adjusted in the next step.

2Adjust each shelf to fit your rack, then mount them in the lowest available space of your rack with the screws, nuts and washers provided C . Note that the support ledges should face inward. Tighten the screws that connect the shelf segments B .

3Attach mounting ears D to the front mounting holes of your equipment E using the screws provided F . The ears should face forward.

4Using an assistant if necessary, lift your equipment and slide it onto the mounting shelves. Attach your equipment to the rack by using the appropriate hardware G through its mounting ears and into the rack rails.

B

A

1

C

B

2

E

D	F
3
G
4

3

Image 4

Contents SmartPro Rackmount Intelligent, Line-Interactive UPS SystemsPage Important Safety Instructions Battery WarningsUPS Location Warnings UPS Connection WarningsMounting Rack Post MountingMounting Tower Post Telecom MountingPlug your equipment into the UPS Plug the UPS into an outlet on a dedicated circuitTurn the UPS on External Battery Connection select models Buttons Front Panel Indicator Lights Front Panel Other UPS Features Rear Panel Basic Operation Service StorageProcedure Two symbols are used on the label ~ AC Voltage DC Voltage Page Manual del propietario Inteligentes e interactivos con la líneaInstrucciones de seguridad importantes Advertencias sobre la ubicación del UPSAdvertencias sobre la conexión del UPS Advertencias sobre la conexión de equiposMontaje Bastidor Montaje de 4 postesMontaje en bastidor continúa Montaje En torreMontaje de 2 postes Telecomunicaciones Tolos los modelos de UPSConecte sus equipos en el UPS Conecte el UPS en una salida de un circuito dedicadoEncienda el UPS Conexión de puerto EPO todos los modelos Comunicaciones USB y serie RS-232 todos los modelosConexión de batería externa modelos exclusivos Botones Panel frontal Operación básica continúa Luces indicadoras Panel frontalOtras funciones del UPS Panel posterior Operación básica continúa Servicio AlmacenamientoProcedimiento Nota sobre el rotulado Manuel du propriétaire Systèmes UPS intelligent, en attente activeMises en garde Emplacement de lUPS Directives de sécurité importantesMises en garde Connexions de lUPS Mises en garde Connexion déquipementMontage Bâti Bâti à quatre montantsMontage bâti suite Montage TourMontage sur 2 montants Télécom Tous les modèles dUPSConnecter votre équipement à lUPS Brancher lUPS dans une prise dun circuit dédiéMettre lUPS sous tension Connexion au port EPO tous les modèles Connexion de batterie externe modèles sélectBoutons Panneau avant Fonctionnement de base, suite Voyants indicateurs Panneau avantAutres caractéristiques de lUPS panneau arrière Fonctionnement de base, suite Service EntreposageProcédure Modèle