Internal Battery Replacement
Under normal conditions, the original batteries in your UPS will last many years. See Safety section before replacing batteries. The batteries are designed for
1Remove the screws A which secure the front bezel.
2Separate the front bezel B from the front panel.
3Remove the battery connector snap covers. Save these covers for reuse.
4Disconnect the battery connectors C and remove the screws D that secure the battery retention bracket in place.
5Remove the battery retention bracket E and remove/ recycle the middle battery pack F .
6Remove/recycle the side battery packs G .
7Replace the battery packs F and G .
8
9Replace the screws D to secure the battery retention bracket in place.
10Connect the battery connectors C . Attach connectors
11Reinstall the battery connector snap covers.
12Replace the front bezel B .
13Replace the screws A to secure the front bezel in place.
| A |
1 | 13 |
| B |
2 | 12 |
| D |
|
| C | D |
|
| |
4 |
|
| F |
| E |
5 |
| G |
| G |
6 | 7 |
28
201207113 933070.indb 28 | 9/17/2012 1:20:10 PM |