Schneider Electric XPSMF2DO801 manual Class D capacity are required, RJ45 Connector, Switches

Equipment Description

Specified Cables The cables are specified by category depending on their transmission and high- frequency properties as follows:

Category	Specification	Approved
1	-	No
2	up to 1 MHz	No
3	up to 16 MHz	No
4	up to 20 MHz	No
5	up to 100 MHz	Yes
6	up to 250 MHz	Yes
7	up to 600 MHz	Yes

The channel as a point-to-point transmission path is defined as follows:

Class	Specification	Approved
A	up to 0.1 MHz	No
B	up to 1 MHz	No
C	up to 16 MHz	No
D	up to 100 MHz	Yes
E	up to 250 MHz	Yes
F	up to 600 MHz	Yes

	The higher the letter, the greater the demand on the transmission channel. For
	Ethernet communication at 100 MHz, Category 5 (or higher) cables and at least
	Class D capacity are required.
RJ45 Connector	For direct Ethernet plug connections without interface elements, you can use
	connectors such as IP 20 Data Plug (Harting(R)). You can assemble the cable
	quickly by crimping the conductors; special tools are not required.
Switches	To span distances of more than 100 m (328.1 ft) using SafeEthernet protocol, rail
	switches of the RS2 series (Hirschmann(R)) with optical fibre ports are
	recommended.

48 33003405 07/2007