Schneider Electric XPSMF2DO801 manual Mechanical, EMC Conditions, Following tables

		Equipment Description
Mechanical	The most important test and limit values for mechanical conditions are listed in the
Conditions	following table:
	EN 61131-2	Mechanical Tests
		Vibration test, operating: 5 Hz to 9 Hz / 3.5 mm, 9 Hz to
		150 Hz / 1g
	6.3.5.1	Immunity vibration test: 10 Hz to 150 Hz, 1 g, EUT
		operating, 10 cycles per axis
	6.3.5.2	Immunity shock test: 15g, 11ms, EUT operating, 2 cycles
		per axis
EMC Conditions	The most important tests and limit values for EMC conditions are listed in the
	following tables:
	EN 61131-2	Noise Immunity Test
	6.3.6.2.1 IEC/EN 61000-4-2	ESD test: 4 kV contact/ 8 kV air discharge
	6.3.6.2.2 IEC/EN 61000-4-3	RFI test (10 V/m): 26 MHz to 1 GHz, 80% AM
	6.3.6.2.3 IEC/EN 61000-4-4	Burst test: 2 kV power supply / 1 kV signal lines
	6.3.6.2.4 IEC/EN 61000-4-12	Damped oscillatory wave immunity test: 1 kV
	IEC/EN 61000-6-2	Noise Immunity Test
	IEC/EN 61000-4-6	Radio frequency common mode: 10 V
		150 kHz to 80 MHz, AM
	IEC/EN 61000-4-3	900 MHz pulses
	IEC/EN 61000-4-5	Surge: 1 kV, 0.5 kV
	IEC/EN 61000-6-4	Noise Emission Test
	EN50011 Class A	Emission test: radiated, conducted

33003405 07/2007 57