Packaging and Dimensions
2PACKAGING AND DIMENSIONS
Projector Packaging
Way of Packaging
The projector can be packed in two different ways :
-in a flightcase or
-in carton.
Flightcase
The projector is packed in a flightcase.
Carton
To provide protection during transportation, the projector is surrounded with foam, placed on a wooden palette and enclosed within a sturdy fibreboard carton. The package is then secured with banding and fastening clips.
To unpack :
First release the two fastening clips and remove the banding. Handle as shown in the drawing.
Pull
To open
As the projector is mounted on a wooden palette, turn out the 8 retaining bolts. Use a 13 mm wrench to remove these bolts.
Take the projector out of its shipping carton by handling by the carry handle and place it on the floor or table.
Warning : Due to the projector's weight (46.5 kg), two people are required to lift the projector, one at each side using the carry handler. The purchaser is reminded to use good practice in lifting the projector to avoid risk of back injury.
3 7 9
1 | 2 | 3 | 4 | 5 |
Hint
Save the original shipping carton and packing material, they will be necessary if you ever have to ship your projector. For maximum protection, repack your projector as it was originally packed at the factory.
Contents of the complete unit (box) :
-1 BARCO SLM R6 (weight ± 56 kg, 123.5 lbs)
-1 remote control unit RCU + 1 battery
-1 power cable.
-1 owner’s manual
-1 safety manual
R5976336 BARCOSLM R6 Executive 06092001 |
| |
|