Barco R9002790 manual Available communication connections, Applications

Page 28

Connections

Communication Connections

Available communication connections :

RS232/422 connection between projector and computer.

Communication port for communication with BARCO peripherals.

Trigger output

RS232 Connections

RS 232/422 input and RS232/422 output of the projector.

The projector has a RS232/422 input port that allows it to communicate with a computer.

The RS232/422 output port can be used as loop through to the next device.

Applications

a)remote control :

-easy adjustment of projector via IBM PC (or compatible) or MAC connection.

-allow storage of multiple projector configurations and set ups.

-wide range of control possibilities.

-address range from 0 to 255.

b)data communications :

-sending data to the projector or copying the data from the projector to a hard memory device.

Set up of the Baud Rate for Communication with a Computer.

See 'Change Baudrate PC' in chapter 'Service mode'.

Communication port for communication with peripherals.

Connecting a RCVDS 05 to the projector.

-Up to 20 inputs with the RCVDS 05 and 90 inputs when RCVDS's are linked via the expansion module.

-Serial communication with the projector.

-Remote control buttons on the RCVDS to control the projector (source selection and analog settings).

-The selected source number will be displayed on a 2 digit display and the selected input module will be indicated with a LED on the rear.

For more information about the use of : the RCVDS 05, consult the owner's manual.

Connecting a VS05 to the projector

The VS05 can switch up to 5 Composite Video sources, 3 Super Video sources and 1 RGB analog or component video source to the projector. In addition, the audio signal proper to the source, can be switched to an audio amplifier.

Order number : R9827890

For more information about the use of the VS05, consult the VS05 owner's manual.

Connecting an IR Remote Receiver to the projector.

This infrared receiver unit makes it possible to control the projector from another room.

There is a communication line cable between the IR receiver and the projector or the RCVDS. The control information from the RCU can now be sent to the IR Remote Receiver.

The IR Remote Receiver displays the selected source on a 7-segment display.

Trigger output

5 V output voltage to trigger an external device (max. 10 mA). This voltage is available when the projector is on.

R5976336 BARCOSLM R6 Executive 06092001

 

4-9

 

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Barco Projection Systems SLM R6Barco n.v./Projection Systems Table of Contents Getting Started Random Access Adjustment Mode Installation Mode Standard Source SET UP Files Index R5976336 Barcoslm R6 Executive Safety Instruction Related to SLM Projectors To prevent battery explosionTo prevent personel injury To prevent projector damageExtra safety manual DefinitionsPackaging and Dimensions Dimensions Installation Guidelines Which configuration can be used Positioning the ProjectorInstallation Guidelines Safety Area around the Projector Re-adjusting the lamp position in the lamp casingAvailable lenses Which Lens has to be selectedLens formulas to calculate the projector distance Installing the Projection Lens How is the battery delivered ? Cleaning the lensHow to install ? AC Power mains cord connection Switching onConnections FusesSwitching to Stand-by Switching OffLamp Run Time Indication Lamp Runtime WarningInput facilities Input facilities, RCVDS05 or VS05 connectedInput module insertion into the projector Which signals can be connected to slot 1 & 2 ? Pin assignment for the DVI connectorHow to select input Slot 1 or Fixed Slot slot 1How to change the input slot setting Adjustment ModeInstallation Input SlotsWhat can be connected to this input ? How to select the Digital inputConnections HD SDI Digital Input slot 3 Set up of the Baud Rate for Communication with a Computer Connecting a Rcvds 05 to the projectorConnecting a VS05 to the projector Connecting an IR Remote Receiver to the projectorConnections Getting Started FunctionalityTerminology RCULamp Run Time Warning Temperature error DMD ErrorService Quick Language ChangeQuick Lens Adjustment Lens Adjustment ZOOM/FOCUSPointing to the reflective screen Quick On Screen Color changeOSD Color Highlighted Item Hardwired Remote Input Hardwired to the XLR InputWhy a projector address ? Set up an Individual Projector AddressHow to control the projector or projectors ? Before using the RCUHow to Program an Address into the RCU ? Display the Projector Address on the ScreenInput Selection PictureContolsPause key Stand-by keyStart UP of the Adjustment Mode PasswordProtectionEntering the Password Start upRemark Setting Up the personalised PasswordsMenus on Local LCD Display Overview Flowchart Random Access Adjustment ModeStarting up Connecting a new Source Start up the File ServicePossible File Manipulations File AnnotationHow to load a file ? Start up the Load FileImage is not perfect ? Load FileHow to start up the Edit menu ? Which items can be adjusted ?How to change the settings ? What can be done with the Edit File menu ?How to find the correct values for the displayed item? Edit File OptionsConfirm Edit File Rename FileHow to change the characters ? Copy FileFile Sort File LoadDelete File Confirm Delete FileHow to change the CTI setting ? What is CTI ?Picture Tuning Available color temperature Adjusting the Color TemperatureWhat can be adjusted ? Custom BalanceHow to change the Gamma Value ? What can be done ?How can it be selected ? PurposeWhy adjusting the input balance ? To change the noise reduction valueNoise Reduction Input BalanceHow to adjust the input balance for YUV input signals? Which geometry adjustments are possible ?How can an adjustment be adjusted ? To start up the Geometry functionsTo start up the size adjustment To start up the shift actionAdjusting the blanking Available Blanking AdjustmentBlanking Setting Up the Aspect Ratio What can be done?To view or to change the input configuration Possible results for the fixed input slots 1What can be installed ? What if a switcher is connected to the projector ?Defining the Output module of the RCVDS05 How to start up ? Defining the Infrared Communication protocolSet up the Correct Configuration How to change this color setting ?Changing the Shutdown Setting What will happenChanging the Background Color Changing the Shutdown TimeHow to select an internal pattern ? What can be done with these internal patterns ?How to shift the image ? How to Zoom/Focus ?Zoom/Focus/Shift How to get an overview ? OptionsHow to set up? Installation Mode Service Mode Built-up of the service modeInformation How to display the Identification screen ?Detailed description How to enable or disable the password function ? About password TypesAccess Control List How to change the password ?Access Control List Entering the new projector address How to change that address ?Start Up the Serial Communication menu Setting up the Baud rate Installing the Interface StandardAvailable Baud rates RS422 TerminationLamp information light output switching How to display the lamp menuHow to switch the constant light output ? How to add or the change the settings ?Available settings How to get add ins ?How to activate an add-in ? Available Add InsHow to select diagnosis ? What can be seen ?How to select ? How to select the overview ?I2C Diagnosis FormatterConfirm Quick Access Programmable Function KeysWhat can be done with these keys How can a Function Key be programmed ?10-2 R5976336 Barcoslm R6 Executive Standard Source SET UP Files Name Resolution Fvert Fhor Fpix Ptot Pact Ltot Lact KHZ MHZMuse Index RCU
Top Page Image Contents