Barco R9002790 manual To view or to change the input configuration

Page 58

Installation Mode

8 INSTALLATION MODE

Installation Mode

Start Up

Push the cursor key  or  to highlight 'Installation Mode' and then press ENTER.

ADJUSTMENT MODE

Select a path from below :

RANDOM ACCESS

INSTALLATION

SERVICE

Source 01 Select with  or 

then <ENTER>

<EXIT> to return.

menu 1

INSTALLATION

INPUT SLOTS

800PERIPHERAL CONVERGENCE

CONFIGURATION

OSD COLOR

INTERNAL PATTERNS

NO SIGNAL

LENS

QUICK ACCESS KEYS

MENU POSITION [DEFAULT]

Select with  or 

then <ENTER> <EXIT> to return.

menu 2

The following items can be selected in the Installation mode :

Input slots : to set up the input priority.

800 Peripheral : to select the type of output module used in the RCVDS05.

Convergence : to adjust the convergence of the image (only for qualified service technicians).

Configuration : to set up the projector position.

OSD color : to change the color of the highlighted item.

No Signal : to display a black or blue screen when no source is connected to the projector or to set up the auto shutdown. Internal Patterns

Lens adjustment

Overview of the Quick Access Keys.

Menu Position : default in the corner or in the center of the image.

Input Slots

What can be done ?

The input configuration of the variable inputs is shown in the input slots menu. These configuration can be changed.

To view or to change the input configuration :

1Push the cursor key  or  to highlight 'Input Slots'.

2 Press ENTER to select.

The internal system will scan the input slots and displays the result in the Input slots menu.

INSTALLATION

INPUT SLOTS

800PERIPHERAL CONVERGENCE

CONFIGURATION

OSD COLOR

INTERNAL PATTERNS

NO SIGNAL

LENS

QUICK ACCESS KEYS

MENU POSITION [DEFAULT]

Select with  or 

then <ENTER>

<EXIT> to return.

menu 1

INPUT SLOTS

1.RGB-SS [CV]

2.RGB-SOG

3.SDI

4.SDI

menu 2

Possible results for the fixed input slots 1 & 2 :

Source	indication
Video or S-Video	Video
	S-Video
RGB analog	RGB-SS[CV] : separate sync is composite video signal on H/C input
	RGB-SS[CS or HS&VS] : separate sync is composite sync or horizontal and vertical sync
	RGB-SOG : sync on green

R5976336 BARCOSLM R6 Executive 06092001		8-1

Image 58

Contents Barco Projection Systems SLM R6Barco n.v./Projection Systems Table of Contents Getting Started Random Access Adjustment Mode Installation Mode Standard Source SET UP Files Index R5976336 Barcoslm R6 Executive To prevent personel injury Safety Instruction Related to SLM ProjectorsTo prevent battery explosion To prevent projector damageExtra safety manual DefinitionsPackaging and Dimensions Dimensions Installation Guidelines Which configuration can be used Positioning the ProjectorInstallation Guidelines Safety Area around the Projector Re-adjusting the lamp position in the lamp casingAvailable lenses Which Lens has to be selectedLens formulas to calculate the projector distance Installing the Projection Lens How is the battery delivered ? Cleaning the lensHow to install ? Connections AC Power mains cord connectionSwitching on FusesLamp Run Time Indication Switching to Stand-bySwitching Off Lamp Runtime WarningInput facilities Input facilities, RCVDS05 or VS05 connectedInput module insertion into the projector How to select input Slot 1 or Which signals can be connected to slot 1 & 2 ?Pin assignment for the DVI connector Fixed Slot slot 1Installation How to change the input slot settingAdjustment Mode Input SlotsWhat can be connected to this input ? How to select the Digital inputConnections HD SDI Digital Input slot 3 Connecting a VS05 to the projector Set up of the Baud Rate for Communication with a ComputerConnecting a Rcvds 05 to the projector Connecting an IR Remote Receiver to the projectorConnections Getting Started FunctionalityTerminology RCULamp Run Time Warning Service Temperature error DMDError Quick Language ChangeQuick Lens Adjustment Lens Adjustment ZOOM/FOCUSPointing to the reflective screen Quick On Screen Color changeOSD Color Highlighted Item Hardwired Remote Input Hardwired to the XLR InputHow to control the projector or projectors ? Why a projector address ?Set up an Individual Projector Address Before using the RCUInput Selection How to Program an Address into the RCU ?Display the Projector Address on the Screen PictureContolsPause key Stand-by keyEntering the Password Start UP of the Adjustment ModePasswordProtection Start upRemark Setting Up the personalised PasswordsMenus on Local LCD Display Overview Flowchart Random Access Adjustment ModeStarting up Possible File Manipulations Connecting a new SourceStart up the File Service File AnnotationImage is not perfect ? How to load a file ?Start up the Load File Load FileHow to change the settings ? How to start up the Edit menu ?Which items can be adjusted ? What can be done with the Edit File menu ?How to find the correct values for the displayed item? Edit File OptionsConfirm Edit File Rename FileHow to change the characters ? Copy FileDelete File File SortFile Load Confirm Delete FileHow to change the CTI setting ? What is CTI ?Picture Tuning What can be adjusted ? Available color temperatureAdjusting the Color Temperature Custom BalanceHow can it be selected ? How to change the Gamma Value ?What can be done ? PurposeNoise Reduction Why adjusting the input balance ?To change the noise reduction value Input BalanceHow can an adjustment be adjusted ? How to adjust the input balance for YUV input signals?Which geometry adjustments are possible ? To start up the Geometry functionsTo start up the size adjustment To start up the shift actionAdjusting the blanking Available Blanking AdjustmentBlanking Setting Up the Aspect Ratio What can be done?To view or to change the input configuration Possible results for the fixed input slots 1What can be installed ? What if a switcher is connected to the projector ?Defining the Output module of the RCVDS05 How to start up ? Defining the Infrared Communication protocolSet up the Correct Configuration How to change this color setting ?Changing the Background Color Changing the Shutdown SettingWhat will happen Changing the Shutdown TimeHow to select an internal pattern ? What can be done with these internal patterns ?How to shift the image ? How to Zoom/Focus ?Zoom/Focus/Shift How to get an overview ? OptionsHow to set up? Installation Mode Service Mode Built-up of the service modeInformation How to display the Identification screen ?Detailed description How to enable or disable the password function ? About password TypesAccess Control List How to change the password ?Access Control List Entering the new projector address How to change that address ?Start Up the Serial Communication menu Available Baud rates Setting up the Baud rateInstalling the Interface Standard RS422 TerminationHow to switch the constant light output ? Lamp information light output switchingHow to display the lamp menu How to add or the change the settings ?How to activate an add-in ? Available settingsHow to get add ins ? Available Add InsHow to select diagnosis ? What can be seen ?I2C Diagnosis How to select ?How to select the overview ? FormatterWhat can be done with these keys Confirm Quick AccessProgrammable Function Keys How can a Function Key be programmed ?10-2 R5976336 Barcoslm R6 Executive Standard Source SET UP Files Name Resolution Fvert Fhor Fpix Ptot Pact Ltot Lact KHZ MHZMuse Index RCU