Barco R9002790 manual Lamp information light output switching, How to display the lamp menu

Page 74

Service Mode

Lamp

Lamp information light output switching.

All information about the lamp is stored inside the lamp house and can be displayed via the projector software on the projection screen. No information can be changed.

The Constant light output function can be changed between yes and no.

How to display the lamp menu.

1Push the cursor key  or  to highlight 'Lamp' (menu 1).

2 Press ENTER to select.

The lamp menu will be displayed (menu 2)

Which information is available ?

Serial number : unique serial number of the lamp.

Type : lamp type.

Run time : total time the lamp is used in this or other projectors.

Remaining run time : time left before the lamp must be replaced

Using the lamp longer than the maximum run time (1500 hours) may damage the projector.

Number of strikes : Total times the lamp is started up.

Z-AXIS : indication to adjust the Z-AXIS of the lamp (see Re-adjustment of the lamp position in chapter Installation Guidelines).

SERVICE

IDENTIFICATION

CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION

LAMP

MORE...

Select with  or 

then <ENTER> <EXIT> to return.

LAMP

Constant light output [YES]

Serial number : R101111

Article number : R9840740

Run time : 10 hours

Remaining run time : 490 hours

Number of strikes : 10

Z-AXIS : 100

Select with  or  <ENTER> to toggle <EXIT> to return.

menu1

menu2

How to switch the constant light output ?

1Push the cursor key  or  to highlight 'Constant Light Output' (menu 1).

2 Press ENTER to toggle between [YES] and [NO]. [YES] : constant light output, power will be adapted. [NO] : fixed power, no power adaptation.

BARCO logo

What can be done ?

The BARCO logo can be added to the image, in overlay or on a background, on any place on the screen.

How to add or the change the settings ?

To add the BARCO logo or to change a setting in the BARCO logo menu:

1Push the cursor key  or  to highlight 'BARCO logo' (menu 1).

2 Press ENTER to select.

The BARCO logo menu will be displayed on the screen (menu 2. Within this menu, three toggle settings and a shift control are available.

SERVICE

BARCO LOGO

ADD-INS

PRESET INPUT BALANCE

DIAGNOSIS

MORE...

Select with  or 

then <ENTER>

<EXIT> to return.

menu1

BARCO LOGO

STATUS : [ON]

BACKGROUND : [ON]

SHIFT

HOT KEY : [TEXT]

Select with  or 

then <ENTER>

<EXIT> to return.

menu2

R5976336 BARCOSLM R6 Executive 06092001		9-7

Image 74

Contents Barco Projection Systems SLM R6Barco n.v./Projection Systems Table of Contents Getting Started Random Access Adjustment Mode Installation Mode Standard Source SET UP Files Index R5976336 Barcoslm R6 Executive To prevent personel injury Safety Instruction Related to SLM ProjectorsTo prevent battery explosion To prevent projector damageExtra safety manual DefinitionsPackaging and Dimensions Dimensions Installation Guidelines Which configuration can be used Positioning the ProjectorInstallation Guidelines Safety Area around the Projector Re-adjusting the lamp position in the lamp casingLens formulas to calculate the projector distance Which Lens has to be selectedAvailable lenses Installing the Projection Lens How to install ? Cleaning the lensHow is the battery delivered ? Connections AC Power mains cord connectionSwitching on FusesLamp Run Time Indication Switching to Stand-bySwitching Off Lamp Runtime WarningInput facilities Input facilities, RCVDS05 or VS05 connectedInput module insertion into the projector How to select input Slot 1 or Which signals can be connected to slot 1 & 2 ?Pin assignment for the DVI connector Fixed Slot slot 1Installation How to change the input slot settingAdjustment Mode Input SlotsConnections How to select the Digital inputWhat can be connected to this input ? HD SDI Digital Input slot 3 Connecting a VS05 to the projector Set up of the Baud Rate for Communication with a ComputerConnecting a Rcvds 05 to the projector Connecting an IR Remote Receiver to the projectorConnections Getting Started FunctionalityTerminology RCULamp Run Time Warning Service Temperature error DMDError Quick Language ChangeQuick Lens Adjustment Lens Adjustment ZOOM/FOCUSOSD Color Highlighted Item Quick On Screen Color changePointing to the reflective screen Hardwired Remote Input Hardwired to the XLR InputHow to control the projector or projectors ? Why a projector address ?Set up an Individual Projector Address Before using the RCUInput Selection How to Program an Address into the RCU ?Display the Projector Address on the Screen PictureContolsPause key Stand-by keyEntering the Password Start UP of the Adjustment ModePasswordProtection Start upMenus on Local LCD Display Setting Up the personalised PasswordsRemark Starting up Random Access Adjustment ModeOverview Flowchart Possible File Manipulations Connecting a new SourceStart up the File Service File AnnotationImage is not perfect ? How to load a file ?Start up the Load File Load FileHow to change the settings ? How to start up the Edit menu ?Which items can be adjusted ? What can be done with the Edit File menu ?How to find the correct values for the displayed item? Edit File OptionsConfirm Edit File Rename FileHow to change the characters ? Copy FileDelete File File SortFile Load Confirm Delete FilePicture Tuning What is CTI ?How to change the CTI setting ? What can be adjusted ? Available color temperatureAdjusting the Color Temperature Custom BalanceHow can it be selected ? How to change the Gamma Value ?What can be done ? PurposeNoise Reduction Why adjusting the input balance ?To change the noise reduction value Input BalanceHow can an adjustment be adjusted ? How to adjust the input balance for YUV input signals?Which geometry adjustments are possible ? To start up the Geometry functionsTo start up the size adjustment To start up the shift actionBlanking Available Blanking AdjustmentAdjusting the blanking Setting Up the Aspect Ratio What can be done?To view or to change the input configuration Possible results for the fixed input slots 1Defining the Output module of the RCVDS05 What if a switcher is connected to the projector ?What can be installed ? How to start up ? Defining the Infrared Communication protocolSet up the Correct Configuration How to change this color setting ?Changing the Background Color Changing the Shutdown SettingWhat will happen Changing the Shutdown TimeHow to select an internal pattern ? What can be done with these internal patterns ?Zoom/Focus/Shift How to Zoom/Focus ?How to shift the image ? How to get an overview ? OptionsHow to set up? Installation Mode Service Mode Built-up of the service modeDetailed description How to display the Identification screen ?Information How to enable or disable the password function ? About password TypesAccess Control List How to change the password ?Access Control List Start Up the Serial Communication menu How to change that address ?Entering the new projector address Available Baud rates Setting up the Baud rateInstalling the Interface Standard RS422 TerminationHow to switch the constant light output ? Lamp information light output switchingHow to display the lamp menu How to add or the change the settings ?How to activate an add-in ? Available settingsHow to get add ins ? Available Add InsHow to select diagnosis ? What can be seen ?I2C Diagnosis How to select ?How to select the overview ? FormatterWhat can be done with these keys Confirm Quick AccessProgrammable Function Keys How can a Function Key be programmed ?10-2 R5976336 Barcoslm R6 Executive Standard Source SET UP Files Name Resolution Fvert Fhor Fpix Ptot Pact Ltot Lact KHZ MHZMuse Index RCU