Random Access Adjustment Mode
How to change the Gamma Value ?
To change the gamma value :
1Push the cursor key or to highlight 'Gamma' (menu 1).
2 Press ENTER to select.
3 Change the gamma value by pushing the cursor key or until the desired value is reached (menu 2). 4 Press EXIT to return to the Picture Tuning menu.
Default value for gamma = 2.2
PICTURE TUNING
CTI [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
INPUT BALANCE
Select with or
then <ENTER>
<EXIT> to return.
menu1
GAMMA = 2.2
3
menu3
Decoding EBU/IRE
Note :
Only for NTSC signals.
What can be done ?
The possibility is offered to decode the NTSC video signals via the default American IRE standard or via the European EBU standard. Decoding a NTSC signal using the European EBU standard may result in a greenish tint.
How can it be selected ?
1Push the cursor key or to highlight 'Decoding'.
2 Press ENTER to toggle between EBU or IRE.
3 Press EXIT to return.
PICTURE TUNING
CTI [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
INPUT BALANCE
Select with or
then <ENTER>
<EXIT> to return.
menu1
Dynamic Color Depth
Purpose:
Increases color contrast for all video and data sources.
To change the dynamic color depth value :
1Push the cursor key or to highlight 'Dynamic Color Depth'.
2 Press ENTER to select.
3 Change the value by pushing the cursor key or until the desired color contrast is reached. Adjustment range : 0 ... 8
Default : 4
4 Press EXIT to return to the Picture Tuning menu.
PICTURE TUNING
CTI [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
INPUT BALANCE
Select with or
then <ENTER>
<EXIT> to return.
DYNAMIC COLOR DEPTH 4
08
menu2
menu1
R5976336 BARCOSLM R6 Executive 06092001 |
| |
|