Barco R9002790 manual How to select ?, How to select the overview ?, I2C Diagnosis, Formatter

Page 77

Service Mode

I2C Diagnosis

How to select ?

1Push the cursor key  or  to highlight 'I2C' (menu 1).

2 Press ENTER to select.

The I2C Diagnosis overview will be displayed.

If the indication behind the hex code is green, everything is ok.

If the indication is red, something is wrong with that indicated address.

DIAGNOSIS

I2C

FORMATTER

Select with  or 

then <ENTER> <EXIT> to return.

menu1

Formatter

I2C DIAGNOSIS
		D CA
DECODER	12H	# # #
MOTOR DRIVER	1AH	# # #
LIGHT SENSOR	1CH	# # #
LAMP DRIVER	20H	# # #
POWER SUPPLY	30H	# # #
FORMATTER	34H	# # #
PMP	4AH	# # #
INPUT SELECTOR	72H	# # #
INPUT SELECTOR	98H	# # #
INPUT SELECTOR	9AH	# # #
LAMP MODULE	A0H # # #
Scroll with  or 
<EXIT> to	return.

menu2

How to select the overview ?

1Push the cursor key  or  to highlight 'Formatter' (menu 1).

2 Press ENTER to select.

An overview of the working of the formatter will be displayed (menu 2).

DIAGNOSIS

I2C

FORMATTER

Select with  or 

then <ENTER> <EXIT> to return.

menu1

FORMATTER
I2C (34H)	OK
CONFIGURATION	OK
INITIALISATION	OK
SELF TEST	OK
RED DISPLAY	OK
GREEN DISPLAY	OK
BLUE DISPLAY	OK

<EXIT> to return.

menu2

9-10		R5976336 BARCOSLM R6 Executive 06092001

Image 77

Contents SLM R6 Barco Projection SystemsBarco n.v./Projection Systems Table of Contents Getting Started Random Access Adjustment Mode Installation Mode Standard Source SET UP Files Index R5976336 Barcoslm R6 Executive To prevent battery explosion Safety Instruction Related to SLM ProjectorsTo prevent personel injury To prevent projector damageDefinitions Extra safety manualPackaging and Dimensions Dimensions Installation Guidelines Positioning the Projector Which configuration can be usedInstallation Guidelines Re-adjusting the lamp position in the lamp casing Safety Area around the ProjectorLens formulas to calculate the projector distance Which Lens has to be selectedAvailable lenses Installing the Projection Lens How to install ? Cleaning the lensHow is the battery delivered ? Switching on AC Power mains cord connectionConnections FusesSwitching Off Switching to Stand-byLamp Run Time Indication Lamp Runtime WarningInput facilities, RCVDS05 or VS05 connected Input facilitiesInput module insertion into the projector Pin assignment for the DVI connector Which signals can be connected to slot 1 & 2 ?How to select input Slot 1 or Fixed Slot slot 1Adjustment Mode How to change the input slot settingInstallation Input SlotsConnections How to select the Digital inputWhat can be connected to this input ? HD SDI Digital Input slot 3 Connecting a Rcvds 05 to the projector Set up of the Baud Rate for Communication with a ComputerConnecting a VS05 to the projector Connecting an IR Remote Receiver to the projectorConnections Functionality Getting StartedRCU TerminologyLamp Run Time Warning Error Temperature error DMDService Quick Language ChangeLens Adjustment ZOOM/FOCUS Quick Lens AdjustmentOSD Color Highlighted Item Quick On Screen Color changePointing to the reflective screen Hardwired to the XLR Input Hardwired Remote InputSet up an Individual Projector Address Why a projector address ?How to control the projector or projectors ? Before using the RCUDisplay the Projector Address on the Screen How to Program an Address into the RCU ?Input Selection PictureContolsStand-by key Pause keyPasswordProtection Start UP of the Adjustment ModeEntering the Password Start upMenus on Local LCD Display Setting Up the personalised PasswordsRemark Starting up Random Access Adjustment ModeOverview Flowchart Start up the File Service Connecting a new SourcePossible File Manipulations File AnnotationStart up the Load File How to load a file ?Image is not perfect ? Load FileWhich items can be adjusted ? How to start up the Edit menu ?How to change the settings ? What can be done with the Edit File menu ?Edit File Options How to find the correct values for the displayed item?Rename File Confirm Edit FileCopy File How to change the characters ?File Load File SortDelete File Confirm Delete FilePicture Tuning What is CTI ?How to change the CTI setting ? Adjusting the Color Temperature Available color temperatureWhat can be adjusted ? Custom BalanceWhat can be done ? How to change the Gamma Value ?How can it be selected ? PurposeTo change the noise reduction value Why adjusting the input balance ?Noise Reduction Input BalanceWhich geometry adjustments are possible ? How to adjust the input balance for YUV input signals?How can an adjustment be adjusted ? To start up the Geometry functionsTo start up the shift action To start up the size adjustmentBlanking Available Blanking AdjustmentAdjusting the blanking What can be done? Setting Up the Aspect RatioPossible results for the fixed input slots 1 To view or to change the input configurationDefining the Output module of the RCVDS05 What if a switcher is connected to the projector ?What can be installed ? Defining the Infrared Communication protocol How to start up ?How to change this color setting ? Set up the Correct ConfigurationWhat will happen Changing the Shutdown SettingChanging the Background Color Changing the Shutdown TimeWhat can be done with these internal patterns ? How to select an internal pattern ?Zoom/Focus/Shift How to Zoom/Focus ?How to shift the image ? Options How to get an overview ?How to set up? Installation Mode Built-up of the service mode Service ModeDetailed description How to display the Identification screen ?Information About password Types How to enable or disable the password function ?Access Control List How to change the password ?Access Control List Start Up the Serial Communication menu How to change that address ?Entering the new projector address Installing the Interface Standard Setting up the Baud rateAvailable Baud rates RS422 TerminationHow to display the lamp menu Lamp information light output switchingHow to switch the constant light output ? How to add or the change the settings ?How to get add ins ? Available settingsHow to activate an add-in ? Available Add InsWhat can be seen ? How to select diagnosis ?How to select the overview ? How to select ?I2C Diagnosis FormatterProgrammable Function Keys Confirm Quick AccessWhat can be done with these keys How can a Function Key be programmed ?10-2 R5976336 Barcoslm R6 Executive Name Resolution Fvert Fhor Fpix Ptot Pact Ltot Lact KHZ MHZ Standard Source SET UP FilesMuse Index RCU