Barco R9002790 Setting up the Baud rate, Available Baud rates, Installing the Interface Standard

Page 73

Service Mode

Setting up the Baud rate

To change the baud rate, handle as follow :

1Push the cursor key  or  to highlight 'Baudrate' (menu 1).

The actual baud rate will be displayed.

2Press ENTER to toggle between the available baudrates. Default : 9600

SERIAL COMMUNICATION

PROJECTOR ADDRESS 001

BAUDRATE [115200]

INTERFACE STANDARD [RS232]

RS422 TERMINATION [ON]

Select with  or 

then <ENTER>

<EXIT> to return.

menu1

Available Baud rates

115200/57600/38400/19200/9600/4800/1200

Installing the Interface Standard

The communication protocol for the communication between the projector and a computer can be set on RS232 or RS422. To set up the desired protocol, handle as follow :

1Push the cursor key  or  to highlight 'Interface Standard' (menu 1). The actual interface standard will be displayed.

2Press ENTER to toggle between RS232 and RS422. Default : RS232

SERIAL COMMUNICATION

PROJECTOR ADDRESS 001

BAUDRATE [115200]

INTERFACE STANDARD [RS232]

RS422 TERMINATION [ON]

Select with  or 

then <ENTER>

<EXIT> to return.

menu1

RS422 Termination

The last projector in a line should be RS422 terminated (ON position). All others in the line should be in the OFF position. To change the termination position :

1Push the cursor key  or  to highlight 'RS422 Termination' (menu 1). The actual setting will be displayed.

2Press ENTER to toggle between ON and OFF. Default setting : ON

SERIAL COMMUNICATION

PROJECTOR ADDRESS 001

BAUDRATE [115200]

INTERFACE STANDARD [RS232]

RS422 TERMINATION [ON]

Select with  or 

then <ENTER> <EXIT> to return.

menu1

9-6		R5976336 BARCOSLM R6 Executive 06092001

Image 73

Contents SLM R6 Barco Projection SystemsBarco n.v./Projection Systems Table of Contents Getting Started Random Access Adjustment Mode Installation Mode Standard Source SET UP Files Index R5976336 Barcoslm R6 Executive To prevent battery explosion Safety Instruction Related to SLM ProjectorsTo prevent personel injury To prevent projector damageDefinitions Extra safety manualPackaging and Dimensions Dimensions Installation Guidelines Positioning the Projector Which configuration can be usedInstallation Guidelines Re-adjusting the lamp position in the lamp casing Safety Area around the ProjectorAvailable lenses Which Lens has to be selectedLens formulas to calculate the projector distance Installing the Projection Lens How is the battery delivered ? Cleaning the lensHow to install ? Switching on AC Power mains cord connectionConnections FusesSwitching Off Switching to Stand-byLamp Run Time Indication Lamp Runtime WarningInput facilities, RCVDS05 or VS05 connected Input facilitiesInput module insertion into the projector Pin assignment for the DVI connector Which signals can be connected to slot 1 & 2 ?How to select input Slot 1 or Fixed Slot slot 1Adjustment Mode How to change the input slot settingInstallation Input SlotsWhat can be connected to this input ? How to select the Digital inputConnections HD SDI Digital Input slot 3 Connecting a Rcvds 05 to the projector Set up of the Baud Rate for Communication with a ComputerConnecting a VS05 to the projector Connecting an IR Remote Receiver to the projectorConnections Functionality Getting StartedRCU TerminologyLamp Run Time Warning Error Temperature error DMDService Quick Language ChangeLens Adjustment ZOOM/FOCUS Quick Lens AdjustmentPointing to the reflective screen Quick On Screen Color changeOSD Color Highlighted Item Hardwired to the XLR Input Hardwired Remote InputSet up an Individual Projector Address Why a projector address ?How to control the projector or projectors ? Before using the RCUDisplay the Projector Address on the Screen How to Program an Address into the RCU ?Input Selection PictureContolsStand-by key Pause keyPasswordProtection Start UP of the Adjustment ModeEntering the Password Start upRemark Setting Up the personalised PasswordsMenus on Local LCD Display Overview Flowchart Random Access Adjustment ModeStarting up Start up the File Service Connecting a new SourcePossible File Manipulations File AnnotationStart up the Load File How to load a file ?Image is not perfect ? Load FileWhich items can be adjusted ? How to start up the Edit menu ?How to change the settings ? What can be done with the Edit File menu ?Edit File Options How to find the correct values for the displayed item?Rename File Confirm Edit FileCopy File How to change the characters ?File Load File SortDelete File Confirm Delete FileHow to change the CTI setting ? What is CTI ?Picture Tuning Adjusting the Color Temperature Available color temperatureWhat can be adjusted ? Custom BalanceWhat can be done ? How to change the Gamma Value ?How can it be selected ? PurposeTo change the noise reduction value Why adjusting the input balance ?Noise Reduction Input BalanceWhich geometry adjustments are possible ? How to adjust the input balance for YUV input signals?How can an adjustment be adjusted ? To start up the Geometry functionsTo start up the shift action To start up the size adjustmentAdjusting the blanking Available Blanking AdjustmentBlanking What can be done? Setting Up the Aspect RatioPossible results for the fixed input slots 1 To view or to change the input configurationWhat can be installed ? What if a switcher is connected to the projector ?Defining the Output module of the RCVDS05 Defining the Infrared Communication protocol How to start up ?How to change this color setting ? Set up the Correct ConfigurationWhat will happen Changing the Shutdown SettingChanging the Background Color Changing the Shutdown TimeWhat can be done with these internal patterns ? How to select an internal pattern ?How to shift the image ? How to Zoom/Focus ?Zoom/Focus/Shift Options How to get an overview ?How to set up? Installation Mode Built-up of the service mode Service ModeInformation How to display the Identification screen ?Detailed description About password Types How to enable or disable the password function ?Access Control List How to change the password ?Access Control List Entering the new projector address How to change that address ?Start Up the Serial Communication menu Installing the Interface Standard Setting up the Baud rateAvailable Baud rates RS422 TerminationHow to display the lamp menu Lamp information light output switchingHow to switch the constant light output ? How to add or the change the settings ?How to get add ins ? Available settingsHow to activate an add-in ? Available Add InsWhat can be seen ? How to select diagnosis ?How to select the overview ? How to select ?I2C Diagnosis FormatterProgrammable Function Keys Confirm Quick AccessWhat can be done with these keys How can a Function Key be programmed ?10-2 R5976336 Barcoslm R6 Executive Name Resolution Fvert Fhor Fpix Ptot Pact Ltot Lact KHZ MHZ Standard Source SET UP FilesMuse Index RCU