Barco LX-5 instruction manual For Customer use, Lens is optional

Page 1

LX-5_EN.book Page 1 Friday, July 4, 2008 9:35 AM

PROJECTOR

LX-5

Please study this instruction manual carefully before starting to operate the unit, in order to use the unit correctly. We take no responsibility for any problems resulting from misuse of this unit by operating this equipment other than instructed in this manual.

USER GUIDE

(lens is optional)

For Customer use :

Enter below the serial No. which is located on the bottom side of the cabinet. Retain this information for future reference.

Model No. R9011221

Serial No.

Getting Started

 

 

 

 

Installation

Connection and

 

 

Network

Settings

Operation and

Settings

Others

Image 1
Contents Lens is optional For Customer useAbout the installation place Safety PrecautionsMachine Noise Information Germany only Do not allow any unqualified person to install the unit Power cord Safety Precautions Cont’dDo not cut off the main plug from this equipment NeutralEMC Supplement Contents High flexible installation FeaturesUser-friendly interface and high operability Accessories Sold Separately AccessoriesMaintenance Procedures Precautions During UseBurning-in of D-ILA Device Viewing Conditions Brightness of RoomFront/Right Side Names and Functions of PartsRear Optional projection lens InstallationMinimum Space Required Projector Installation Angle Installing the Projector and Screen When shift amount in the left/right direction is 0 % Installing the Projector and Screen Cont’d When shift amount in the left direction is -50 % LXD 11 Short focal length lensProjecting images by arranging projectors side by side  When light passes through the glass of projection boothScreen Size and Projection Distance Installing the Projector Screen Cont’d LXD 1.5 1.9 Zoom lens Approx .03 m LXD 11 Short focal length lens Connection During Single-Screen Mode Display Connecting Video Signals of the Computer Possible Input Signals and Projected Image  Connection During Single-Screen Mode Display Connection During Two-Screen/Four Screen Mode Display Connecting Video Signals Computer Cont’d Connection Example During Four-Screen Mode  Connection Example During Two-Screen ModeSpecifications of PC for Controlling this Projector Connection Using a LAN Cable When assigning a static IP address  When assigning IP address from the Dhcp serverIs not attached Turning On the Main Power IP address setting at the computer IP Address SettingsDefault Gateway Assigning a static IP addressDeselect the check Select AEnableB Assigning a static IP address Cont’d Cont’dAfter connecting, turn on the main power Using the Mail Delivery FeatureSet the Adhcp ClientB setting of this projector to Adhcpb Assigning IP Address from the Dhcp ServerProjecting Image Useful Features During Projection Main Menu Setting Menu Cont’dLatest Error Setting Value Description PowerSignal Status TemperatureImage Menu Setting Value Description Input Level Setting MenuDisplay Mode Convergence Menu Setting Value Description RedImage Green color value is fixed Lens Menu This menu is used for adjusting the projection lensFocus ShiftOption Menu Network Menu Mail Menu  Error message sent from this projectorMail Setting Value Description Mail SettingAddress Smtp ServerCommand Format Communication SpecificationsRS-232C Interface  Parameters used for the data format  External control command tableON/OFF Cleaning and Replacing the Filter MaintenanceRoutine Servicing Replacement of Light Source LampTroubleshooting Immediately After power is Turned on Screen does Mode displayImmediately When Projection has Ended Image isMessage Cause Details What to do when these messages are displayedLamp Time Over Out of Range Measures when the warning mode appears IndicatorsIndicator Description Check MeasureLatest Error Specifications RS-232C Terminal Pin No Signal Operation Signal Direction Specifications Cont’dDVI-D Terminal Pin No Signal  Pin Assignment Top Dimensional Outline Drawing Side  Front  RearProjector