Barco LX-5 instruction manual Connecting Video Signals Computer Cont’d

LX-5_EN.book Page 20 Friday, July 4, 2008 9:35 AM

Connection and Installation

Connecting Video Signals of

the Computer (Cont’d)

Connection During Two-Screen/Four-

Screen Mode Display

The two-screen/four-screen mode enables simultaneous display of signals from two or four computers.

To select the two-screen mode, set “Display Mode” in the Setting menu to “Double”. To select the four-screen mode, set it to “Cross”. (A Page 33)

Possible Input Signals and Projected Image

	Computer 1, Computer 2			Output Status
Resolution	Channel	Link Status
20481200	1ch	Single	Normal		20481200
20481080	1ch	Single	Normal		20481080
19201200	1ch	Single	Normal		19201200
19201080	1ch	Single	Normal		19201080
16001200	1ch	Single	Normal		16001200
12801024	1ch	Single	Normal		12801024
1024768	1ch	Single	Normal		1024768
800600	1ch	Single	Normal		800600
640480	1ch	Single	Normal		640480

NOTE:

●This projector converts the frame rate to 60 Hz regardless of the synchronizing signal frequency at the computer’s end.

●The respective signals are displayed at the center of the split screen.

●When in the two-screen mode, the screen appears blue (or black depending on the setting) when there is no input.

Two-Screen Mode	Four-Screen Mode
(Example) DVI 1: 19201080,	(Example) DVI 1:	20481200, DVI 2: 19201080,
DVI 3: 19201080	DVI 3:	1024768, DVI 4: 16001200
4096		4096

			DVI 1	DVI 2	1200
2400	DVI 1	DVI 3	2400
			DVI 3	DVI 4
	2048		2048

20