Barco LX-5 Using the Mail Delivery Feature, Assigning IP Address from the Dhcp Server

Page 27

LX-5_EN.book Page 27 Friday, July 4, 2008 9:35 AM

Assigning IP Address from the DHCP Server

The IP address is automatically assigned by the DHCP server.

1 After connecting, turn on the main power.

●Refer to page 22 on the details of connection.

●Refer to page 23 for procedures to turn on the main power.

2 Set the A DHCP Client B setting of this projector to A DHCP B.

●The AIP Address SettingB of this projector is set to AStatic IPB (the DHCP client function is OFF) by default. When assigning an IP address from the DHCP server, access this projector from the computer to alter the settings. For details on the setting procedures, refer to “Setting (Changing) the IP address of this projector”. (A Page 25)

NOTE:

●Please consult the network administrator on the IP address assigned to this projector.

●When ADHCP ClientB is set to ADHCPB, and if the projector is started up in a LAN where a DHCP server does not exist, the projector will start up using the default IP address instead.

CAUTION:

●Configure the DHCP server such that the same IP address is assigned to the AMac AddressB of this projector by the DHCP server at all times. Connection may fail if the above setting is not performed.

Connecting this projector and the computer using a USB cable

You can connect this projector and the controlling computer using a USB cable.

●You need to install a driver in order to connect the projector and computer using a USB cable.

NOTE:

●For details on the installation of the USB driver, please consult your authorized dealer.

Using the Mail Delivery Feature

This feature enables delivery of mail (error message) to the preset e-mail address when error occurs inside this projector unit.

Connection Example (When DHCP Server is Used)

ADSL modem, etc.

To Internet Connection

ETHER

LAN

WAN		LAN1 LAN2 LAN3 LAN4

DHCP Server

To LAN Terminal

27

Image 27

Contents Lens is optional For Customer useSafety Precautions About the installation placeMachine Noise Information Germany only Do not allow any unqualified person to install the unit Neutral Safety Precautions Cont’dPower cord Do not cut off the main plug from this equipmentEMC Supplement Contents Features High flexible installationUser-friendly interface and high operability Accessories Sold Separately AccessoriesViewing Conditions Brightness of Room Precautions During UseMaintenance Procedures Burning-in of D-ILA DeviceFront/Right Side Names and Functions of PartsRear Installation Optional projection lensMinimum Space Required Projector Installation Angle Installing the Projector and ScreenLXD 11 Short focal length lens Installing the Projector and Screen Cont’d When shift amount in the left/right direction is 0 % When shift amount in the left direction is -50 %Projecting images by arranging projectors side by side When light passes through the glass of projection boothApprox .03 m Installing the Projector Screen Cont’dScreen Size and Projection Distance LXD 1.5 1.9 Zoom lens LXD 11 Short focal length lens Connecting Video Signals of the Computer Connection During Single-Screen Mode Display Possible Input Signals and Projected Image Connection During Single-Screen Mode Display Connection During Two-Screen/Four Screen Mode Display Connecting Video Signals Computer Cont’d Connection Example During Four-Screen Mode Connection Example During Two-Screen Mode When assigning IP address from the Dhcp server Connection Using a LAN CableSpecifications of PC for Controlling this Projector When assigning a static IP addressIs not attached Turning On the Main PowerAssigning a static IP address IP Address Settings IP address setting at the computer Default GatewayDeselect the check Select AEnableB Assigning a static IP address Cont’d Cont’dAssigning IP Address from the Dhcp Server Using the Mail Delivery FeatureAfter connecting, turn on the main power Set the Adhcp ClientB setting of this projector to AdhcpbProjecting Image Useful Features During Projection Main Menu Setting Menu Cont’dTemperature Setting Value Description PowerLatest Error Signal StatusImage Menu Setting Menu Setting Value Description Input LevelDisplay Mode Setting Value Description Red Convergence MenuImage Green color value is fixed Shift This menu is used for adjusting the projection lensLens Menu FocusOption Menu Network Menu Mail Menu Error message sent from this projectorSmtp Server Setting Value Description Mail SettingMail AddressCommunication Specifications Command FormatRS-232C Interface External control command table Parameters used for the data formatON/OFF Cleaning and Replacing the Filter MaintenanceRoutine Servicing Replacement of Light Source LampTroubleshooting Image is Mode displayImmediately After power is Turned on Screen does Immediately When Projection has EndedOut of Range What to do when these messages are displayedMessage Cause Details Lamp Time OverCheck Measure Indicators Measures when the warning mode appears Indicator DescriptionLatest Error Specifications Pin Assignment Specifications Cont’dRS-232C Terminal Pin No Signal Operation Signal Direction DVI-D Terminal Pin No Signal Front Rear Dimensional Outline Drawing Top SideProjector