Barco LX-5 instruction manual EMC Supplement

Page 5

LX-5_EN.book Page 5 Friday, July 4, 2008 9:35 AM

EMC Supplement

-This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives. This equipment is designed for professional projector appliances and can be used in the following environments.

●Controlled EMC environment (for example purpose built broadcasting or recording studio), and the rural outdoors environment (far away from railways, transmitters, overhead power lines, etc).

In order to keep the best performance and furthermore for electromagnetic compatibility we recommend to use the cables not exceeding the following length:

Cables		Length
Power cord	Power supply cord	3.3 m
DVI (X4) Cable	Shielded cable	5.0 m
USB Cable	Shielded cable	2.0 m
LAN Cable	Shielded cable	2.0 m
RS-232C Cable	Shielded cable	1.6 m

●The inrush current of this apparatus is 9.705 amperes.

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. In case where the strong electromagnetic waves or magnetism are near the signal cable, the picture will contain noise. In such cases, please keep the cable away from the sources of the disturbance.

Dear Customer,

This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety.

5

Image 5

Contents Lens is optional For Customer useMachine Noise Information Germany only Safety PrecautionsAbout the installation place Do not allow any unqualified person to install the unit Power cord Safety Precautions Cont’dDo not cut off the main plug from this equipment NeutralEMC Supplement Contents User-friendly interface and high operability FeaturesHigh flexible installation Accessories Sold Separately AccessoriesMaintenance Procedures Precautions During UseBurning-in of D-ILA Device Viewing Conditions Brightness of RoomFront/Right Side Names and Functions of PartsRear Minimum Space Required InstallationOptional projection lens Projector Installation Angle Installing the Projector and Screen When shift amount in the left/right direction is 0 % Installing the Projector and Screen Cont’d When shift amount in the left direction is -50 % LXD 11 Short focal length lensProjecting images by arranging projectors side by side When light passes through the glass of projection boothScreen Size and Projection Distance Installing the Projector Screen Cont’d LXD 1.5 1.9 Zoom lens Approx .03 m LXD 11 Short focal length lens Possible Input Signals and Projected Image Connecting Video Signals of the ComputerConnection During Single-Screen Mode Display Connection During Single-Screen Mode Display Connection During Two-Screen/Four Screen Mode Display Connecting Video Signals Computer Cont’d Connection Example During Four-Screen Mode Connection Example During Two-Screen ModeSpecifications of PC for Controlling this Projector Connection Using a LAN Cable When assigning a static IP address When assigning IP address from the Dhcp serverIs not attached Turning On the Main Power IP address setting at the computer IP Address SettingsDefault Gateway Assigning a static IP addressDeselect the check Select AEnableB Assigning a static IP address Cont’d Cont’dAfter connecting, turn on the main power Using the Mail Delivery FeatureSet the Adhcp ClientB setting of this projector to Adhcpb Assigning IP Address from the Dhcp ServerProjecting Image Useful Features During Projection Main Menu Setting Menu Cont’dLatest Error Setting Value Description PowerSignal Status TemperatureImage Menu Display Mode Setting MenuSetting Value Description Input Level Image Green color value is fixed Setting Value Description RedConvergence Menu Lens Menu This menu is used for adjusting the projection lensFocus ShiftOption Menu Network Menu Mail Menu Error message sent from this projectorMail Setting Value Description Mail SettingAddress Smtp ServerRS-232C Interface Communication SpecificationsCommand Format ON/OFF External control command table Parameters used for the data format Cleaning and Replacing the Filter MaintenanceRoutine Servicing Replacement of Light Source LampTroubleshooting Immediately After power is Turned on Screen does Mode displayImmediately When Projection has Ended Image isMessage Cause Details What to do when these messages are displayedLamp Time Over Out of Range Measures when the warning mode appears IndicatorsIndicator Description Check MeasureLatest Error Specifications RS-232C Terminal Pin No Signal Operation Signal Direction Specifications Cont’dDVI-D Terminal Pin No Signal Pin Assignment Top Dimensional Outline Drawing Side Front RearProjector