Barco LX-5 instruction manual Maintenance, Cleaning and Replacing the Filter

Page 42

LX-5_EN.book Page 42 Friday, July 4, 2008 9:35 AM

Others

Maintenance

Turn off the power of the projector unit, and unplug the power cord when cleaning or replacing the filter.

Cleaning and Replacing the Filter

Clean the filter regularly. If the filter is soiled, air intake efficiency may deteriorate, thus resulting in malfunction of the product. Replace with a new one if the filter fails to remove dust thoroughly or if it is damaged.

Failure to do so may cause dust to enter the projector and shadows to appear on the projected image.

If dirt has entered this product or if you need to purchase the filter, please consult your authorized dealer.

Filter

Sponge

Filter Cover

CAUTION:

●Remove the four screws on the inner side (for fastening the filter cover).

Filter Cover

	Filter Cover	Filter
	Filter Cover	Sponge
		Sponge

CAUTION:

●Remove the four screws on the inner side (for fastening the filter cover).

Image 42

Contents For Customer use Lens is optionalSafety Precautions About the installation placeMachine Noise Information Germany only Do not allow any unqualified person to install the unit Do not cut off the main plug from this equipment Safety Precautions Cont’dPower cord NeutralEMC Supplement Contents Features High flexible installationUser-friendly interface and high operability Accessories Accessories Sold SeparatelyBurning-in of D-ILA Device Precautions During UseMaintenance Procedures Viewing Conditions Brightness of RoomNames and Functions of Parts Front/Right SideRear Installation Optional projection lensMinimum Space Required Installing the Projector and Screen Projector Installation Angle When shift amount in the left direction is -50 % Installing the Projector and Screen Cont’d When shift amount in the left/right direction is 0 % LXD 11 Short focal length lens When light passes through the glass of projection booth Projecting images by arranging projectors side by side LXD 1.5 1.9 Zoom lens Installing the Projector Screen Cont’dScreen Size and Projection Distance Approx .03 m LXD 11 Short focal length lens Connecting Video Signals of the Computer Connection During Single-Screen Mode Display Possible Input Signals and Projected Image Connection During Single-Screen Mode Display Connecting Video Signals Computer Cont’d Connection During Two-Screen/Four Screen Mode Display Connection Example During Two-Screen Mode Connection Example During Four-Screen Mode When assigning a static IP address Connection Using a LAN CableSpecifications of PC for Controlling this Projector When assigning IP address from the Dhcp serverTurning On the Main Power Is not attachedDefault Gateway IP Address Settings IP address setting at the computer Assigning a static IP addressDeselect the check Select AEnableB Cont’d Assigning a static IP address Cont’dSet the Adhcp ClientB setting of this projector to Adhcpb Using the Mail Delivery FeatureAfter connecting, turn on the main power Assigning IP Address from the Dhcp ServerProjecting Image Useful Features During Projection Setting Menu Cont’d Main MenuSignal Status Setting Value Description PowerLatest Error TemperatureImage Menu Setting Menu Setting Value Description Input LevelDisplay Mode Setting Value Description Red Convergence MenuImage Green color value is fixed Focus This menu is used for adjusting the projection lensLens Menu ShiftOption Menu Network Menu Error message sent from this projector Mail MenuAddress Setting Value Description Mail SettingMail Smtp ServerCommunication Specifications Command FormatRS-232C Interface External control command table Parameters used for the data formatON/OFF Maintenance Cleaning and Replacing the FilterReplacement of Light Source Lamp Routine ServicingTroubleshooting Immediately When Projection has Ended Mode displayImmediately After power is Turned on Screen does Image isLamp Time Over What to do when these messages are displayedMessage Cause Details Out of RangeIndicator Description Indicators Measures when the warning mode appears Check MeasureLatest Error Specifications DVI-D Terminal Pin No Signal Specifications Cont’dRS-232C Terminal Pin No Signal Operation Signal Direction Pin Assignment Side Dimensional Outline Drawing Top Front RearProjector