Barco LX-5 Features, High flexible installation, User-friendly interface and high operability

Page 7

LX-5_EN.book Page 7 Friday, July 4, 2008 9:35 AM

Features

Ultra-high resolution, high contrast, and high quality projector

Ultra-high resolution of 40962400

This projector comes with a newly developed 1.27" and 40962400 pixel D-ILA (Direct-drive Image Light Amplifier) device, and achieves an ultra-high resolution of 9.83 million pixels, which is four times that of full HD.

High contract ratio of 10,000:1

A high contrast ratio of 10,000:1 (native) is achieved through combining the D-ILA device with WireGrid (inorganic reflective polarizing plate) that is employed in the new optical engine.

High flexible installation

Design is compact and light, and enables stacking

Its weight is as light as 56 kg (excluding lens).

Stackable design enhances installation for special applications (e.g. 3D).

Vertical/Horizontal lens shift

This projector enables not only vertical, but also horizontal lens shift, which enables a larger degree of flexibility in the layout.

Zoom lens : vertical 100%, horizontal 50%

Short focal length lens : vertical 30%, horizontal 10%

Inclined installation

This product can be installed at a tilt angle of up to 90°, which provides greater flexibility in the location of the projection screen.

Low power consumption

This product helps to save power with a consumption of not more than 1.5 kW.

User-friendly interface and high operability

Equipped with DVI (Dual-Link)4 input terminals

Network-supported

In addition to the conventional RS-232C, it also provide support for connection using Ethernet.

You can make adjustments or configure settings from the web browser on the PC without having to install any special software.

Network connection enables you to make perform adjustment or configure settings for multiple projectors using a single PC.

The Email feature enables you to send reports on the lamp replacement timing or error messages to a remote location.

Comes with various built-in test patterns (six types including Cross Hatch, Color Bars, etc.)

Enables image adjustment without the need of external signal sources.

Features that enable flexible display and expression

Supports multi screens (single screen, two- screen, and four-screen modes)

Comes with three types of built-in gamma tables. Enables configuration of gradation expression settings according to the video image

7

Image 7
Contents Lens is optional For Customer useAbout the installation place Safety PrecautionsMachine Noise Information Germany only Do not allow any unqualified person to install the unit Neutral Safety Precautions Cont’dPower cord Do not cut off the main plug from this equipmentEMC Supplement Contents High flexible installation FeaturesUser-friendly interface and high operability Accessories Sold Separately AccessoriesViewing Conditions Brightness of Room Precautions During UseMaintenance Procedures Burning-in of D-ILA DeviceFront/Right Side Names and Functions of PartsRear Optional projection lens InstallationMinimum Space Required Projector Installation Angle Installing the Projector and ScreenLXD 11 Short focal length lens Installing the Projector and Screen Cont’d When shift amount in the left/right direction is 0 %  When shift amount in the left direction is -50 %Projecting images by arranging projectors side by side  When light passes through the glass of projection boothApprox .03 m Installing the Projector Screen Cont’dScreen Size and Projection Distance  LXD 1.5 1.9 Zoom lens LXD 11 Short focal length lens Connection During Single-Screen Mode Display Connecting Video Signals of the Computer Possible Input Signals and Projected Image  Connection During Single-Screen Mode Display Connection During Two-Screen/Four Screen Mode Display Connecting Video Signals Computer Cont’d Connection Example During Four-Screen Mode  Connection Example During Two-Screen Mode When assigning IP address from the Dhcp server Connection Using a LAN CableSpecifications of PC for Controlling this Projector  When assigning a static IP addressIs not attached Turning On the Main PowerAssigning a static IP address IP Address Settings IP address setting at the computer Default GatewayDeselect the check Select AEnableB Assigning a static IP address Cont’d Cont’dAssigning IP Address from the Dhcp Server Using the Mail Delivery FeatureAfter connecting, turn on the main power Set the Adhcp ClientB setting of this projector to AdhcpbProjecting Image Useful Features During Projection Main Menu Setting Menu Cont’dTemperature Setting Value Description PowerLatest Error Signal StatusImage Menu Setting Value Description Input Level Setting MenuDisplay Mode Convergence Menu Setting Value Description RedImage Green color value is fixed Shift This menu is used for adjusting the projection lensLens Menu FocusOption Menu Network Menu Mail Menu  Error message sent from this projectorSmtp Server Setting Value Description Mail SettingMail AddressCommand Format Communication SpecificationsRS-232C Interface  Parameters used for the data format  External control command tableON/OFF Cleaning and Replacing the Filter MaintenanceRoutine Servicing Replacement of Light Source LampTroubleshooting Image is Mode displayImmediately After power is Turned on Screen does Immediately When Projection has EndedOut of Range What to do when these messages are displayedMessage Cause Details Lamp Time OverCheck Measure Indicators Measures when the warning mode appears Indicator DescriptionLatest Error Specifications  Pin Assignment Specifications Cont’dRS-232C Terminal Pin No Signal Operation Signal Direction DVI-D Terminal Pin No Signal Front  Rear Dimensional Outline Drawing Top  SideProjector