Barco LX-5 instruction manual Connection During Single-Screen Mode Display

Page 19

LX-5_EN.book Page 19 Friday, July 4, 2008 9:35 AM

Normal

2 Stripes


	DVI 1		DVI 1

DVI 3

DVI 1

4 Stripes				Cross


DVI 2	DVI 3	DVI 4	DVI 1		DVI 2

			DVI 3		DVI 4

Connection During Single-Screen Mode Display

Below is the connection example for four-channel signals from the computer.

For two-channel signals from the computer, connect to the [DVI 1] and [DVI 3] terminals of this projector.

Desktop Computer

DVI-D Cable (Sold Separately)

To DVI Terminal

DVI 1
DVI 2
CONTROL
USB
DVI 3
LAN
	OPERATE I/B STANDBY/ON
	LAMP
DVI 4	WARNING
RS-232C

NOTE:

●Depending on your DVI-D cable, the signal may attenuate and the image become unstable.

●Use of DVI-D cables compliant with the DDWG standard is recommended.

Image 19

Contents Lens is optional For Customer useAbout the installation place Safety PrecautionsMachine Noise Information Germany only Do not allow any unqualified person to install the unit Neutral Safety Precautions Cont’dPower cord Do not cut off the main plug from this equipmentEMC Supplement Contents High flexible installation FeaturesUser-friendly interface and high operability Accessories Sold Separately AccessoriesViewing Conditions Brightness of Room Precautions During UseMaintenance Procedures Burning-in of D-ILA DeviceFront/Right Side Names and Functions of PartsRear Optional projection lens InstallationMinimum Space Required Projector Installation Angle Installing the Projector and ScreenLXD 11 Short focal length lens Installing the Projector and Screen Cont’d When shift amount in the left/right direction is 0 % When shift amount in the left direction is -50 %Projecting images by arranging projectors side by side When light passes through the glass of projection boothApprox .03 m Installing the Projector Screen Cont’dScreen Size and Projection Distance LXD 1.5 1.9 Zoom lens LXD 11 Short focal length lens Connection During Single-Screen Mode Display Connecting Video Signals of the Computer Possible Input Signals and Projected Image Connection During Single-Screen Mode Display Connection During Two-Screen/Four Screen Mode Display Connecting Video Signals Computer Cont’d Connection Example During Four-Screen Mode Connection Example During Two-Screen Mode When assigning IP address from the Dhcp server Connection Using a LAN CableSpecifications of PC for Controlling this Projector When assigning a static IP addressIs not attached Turning On the Main PowerAssigning a static IP address IP Address Settings IP address setting at the computer Default GatewayDeselect the check Select AEnableB Assigning a static IP address Cont’d Cont’dAssigning IP Address from the Dhcp Server Using the Mail Delivery FeatureAfter connecting, turn on the main power Set the Adhcp ClientB setting of this projector to AdhcpbProjecting Image Useful Features During Projection Main Menu Setting Menu Cont’dTemperature Setting Value Description PowerLatest Error Signal StatusImage Menu Setting Value Description Input Level Setting MenuDisplay Mode Convergence Menu Setting Value Description RedImage Green color value is fixed Shift This menu is used for adjusting the projection lensLens Menu FocusOption Menu Network Menu Mail Menu Error message sent from this projectorSmtp Server Setting Value Description Mail SettingMail AddressCommand Format Communication SpecificationsRS-232C Interface Parameters used for the data format External control command tableON/OFF Cleaning and Replacing the Filter MaintenanceRoutine Servicing Replacement of Light Source LampTroubleshooting Image is Mode displayImmediately After power is Turned on Screen does Immediately When Projection has EndedOut of Range What to do when these messages are displayedMessage Cause Details Lamp Time OverCheck Measure Indicators Measures when the warning mode appears Indicator DescriptionLatest Error Specifications Pin Assignment Specifications Cont’dRS-232C Terminal Pin No Signal Operation Signal Direction DVI-D Terminal Pin No Signal Front Rear Dimensional Outline Drawing Top SideProjector