Network Settings
Connection Using a LAN Cable
Connect this projector, the computer for controlling this projector, and the switching hub using LAN cables, followed by configuring the network.
Connection Example
When assigning a static IP address
You can acquire the IP address from the controlling computer simply by configuring a network that consists of this projector, the controlling computer, and switching hub. Please refer to technical books on networks for details.
Switching Hub
Specifications of PC for
Controlling this Projector
OS | Windows XP Professional SP2 / |
| Windows XP Home Edition SP2 |
|
|
CPU | Pentium3 1 GHz or higher |
|
|
Memory | 256 MB and above |
|
|
NOTE:
●Make use of Internet Explorer Ver. 6.0.
●Windows® is either registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
CAUTION:
●The PC specifications above are reference values for the application software to run smoothly, and are not intended to guarantee their operation.
Note that the applications may not run smoothly depending on the condition of use of the respective users even when the system requirements are satisfied.
To Network To LAN
Terminal Terminal
NOTE:
●Make use of Cat. 5 (equivalent or higher) straight
CAUTION:
●Configure a network using only this projector, the controlling computer, and switching hub. Configuring the IP address settings when the LAN cable is connected to another network equipment or a hub that is connected to a different network may cause troubles to occur.
When assigning IP address from the DHCP server
Router
(DHCP Server)
LAN
|
|
|
| WAN | LAN1 LAN2 LAN3 LAN4 | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| To LAN | |
To Network | ||||
| ||||
Terminal Terminal
NOTE:
●Make use of Cat. 5 (equivalent or higher)
22