Connection and Installation
Installing the Projector and Screen (Cont’d)
Movable Range of Projected Image LXD (1.5 - 1.9) Zoom lens
When shift amount in the right direction is +50 %
Install the projector such that the center of the lens is aligned with the 1/4 position from the left edge of the screen.
100 %
50 %
100 %
Projected
Image
50 %
Movable
Range
LXD (1:1) Short focal length lens
| 30 % | Projected |
|
| |
|
| Image |
10 % |
| 10 % |
When shift amount in the left/right direction is 0 %
Install the projector such that the center of the lens is aligned with the center of the screen.
When shift amount in the left direction is –50 %
Install the projector such that the center of the lens is aligned with the 1/4 position from the right edge of the screen.
Movable
30 %Range
NOTE:
●When using the lens shift feature, do not exceed the range (shift amount) as shown above. If the shift amount exceeds the range as shown, shadows will appear on the projected image.
Lens Fixation Mechanism
A screw for securing the lens mechanism is attached in the factory shipment to prevent damage of the equipment during transportation. If the lens does not move horizontally or vertically when you operate AShiftB in the Lens menu, this could be because the screw has not been removed. When this occurs, please consult your authorized dealer.
14