Barco LX-5 What to do when these messages are displayed, Message Cause Details, Lamp Time Over

Page 46

LX-5_EN.book Page 46 Friday, July 4, 2008 9:35 AM

Others

What to do when these messages are displayed

Messages are displayed when the lamp life has expired and when there is input of signals that cannot be used.

Message

Lamp Time Over

Message

Cause (Details)

 

 

 

● Displayed when the lamp time has exceeded 1500 hours.

 

The message is displayed for a period of 3 minutes during each

Lamp Time Over

projection.

Replace with a new lamp unit.

 

 

For details on replacement of the lamp unit, please consult your

 

authorized dealer.

 

 

 

● When there is input of video signals that cannot be used with this

Out of Range

unit

 

Input video signals that can be used.

 

 

 

● When no device is connected to the input terminal

No Input

● When the input terminal is connected but there is no signal

 

Input the video signals.

 

 

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents For Customer use Lens is optionalAbout the installation place Safety PrecautionsMachine Noise Information Germany only Do not allow any unqualified person to install the unit Do not cut off the main plug from this equipment Safety Precautions Cont’dPower cord NeutralEMC Supplement Contents High flexible installation FeaturesUser-friendly interface and high operability Accessories Accessories Sold SeparatelyBurning-in of D-ILA Device Precautions During UseMaintenance Procedures Viewing Conditions Brightness of RoomNames and Functions of Parts Front/Right SideRear Optional projection lens InstallationMinimum Space Required Installing the Projector and Screen Projector Installation Angle When shift amount in the left direction is -50 % Installing the Projector and Screen Cont’d When shift amount in the left/right direction is 0 % LXD 11 Short focal length lens When light passes through the glass of projection booth Projecting images by arranging projectors side by side LXD 1.5 1.9 Zoom lens Installing the Projector Screen Cont’dScreen Size and Projection Distance Approx .03 m LXD 11 Short focal length lens Connection During Single-Screen Mode Display Connecting Video Signals of the Computer Possible Input Signals and Projected Image  Connection During Single-Screen Mode Display Connecting Video Signals Computer Cont’d Connection During Two-Screen/Four Screen Mode Display Connection Example During Two-Screen Mode  Connection Example During Four-Screen Mode When assigning a static IP address Connection Using a LAN CableSpecifications of PC for Controlling this Projector  When assigning IP address from the Dhcp serverTurning On the Main Power Is not attachedDefault Gateway IP Address Settings IP address setting at the computer Assigning a static IP addressDeselect the check Select AEnableB Cont’d Assigning a static IP address Cont’dSet the Adhcp ClientB setting of this projector to Adhcpb Using the Mail Delivery FeatureAfter connecting, turn on the main power Assigning IP Address from the Dhcp ServerProjecting Image Useful Features During Projection Setting Menu Cont’d Main MenuSignal Status Setting Value Description PowerLatest Error TemperatureImage Menu Setting Value Description Input Level Setting MenuDisplay Mode Convergence Menu Setting Value Description RedImage Green color value is fixed Focus This menu is used for adjusting the projection lensLens Menu ShiftOption Menu Network Menu  Error message sent from this projector Mail MenuAddress Setting Value Description Mail SettingMail Smtp ServerCommand Format Communication SpecificationsRS-232C Interface  Parameters used for the data format  External control command tableON/OFF Maintenance Cleaning and Replacing the FilterReplacement of Light Source Lamp Routine ServicingTroubleshooting Immediately When Projection has Ended Mode displayImmediately After power is Turned on Screen does Image isLamp Time Over What to do when these messages are displayedMessage Cause Details Out of RangeIndicator Description Indicators Measures when the warning mode appears Check MeasureLatest Error Specifications DVI-D Terminal Pin No Signal Specifications Cont’dRS-232C Terminal Pin No Signal Operation Signal Direction  Pin Assignment Side Dimensional Outline Drawing Top  Front  RearProjector
Top Page Image Contents