Overlaying projected images (when zoom lens is in use)
Projecting images by stacking projectors
The lens shift feature enables you to use up to three stacked projectors at the same time.
Stacking projectors enhances the brightness level, and helps to project images that are sufficiently bright even when the venue is relatively big or bright.
CAUTION: |
●When the projectors are stacked together during use, ensure that the installation site is sufficiently strong and there is proper air cooling around the projectors.
Take the necessary measures to prevent the projectors from toppling or falling off so as to ensure safety during emergency situations, such as earthquakes, and to prevent accidents from occurring. For details, please consult your authorized dealer.
Projecting images by arranging projectors side by side
The lens shift feature enables you to use up to two projectors that are arranged side by side. Arranging two projectors side by side enhances the brightness level, and helps to project images that are sufficiently bright even when the venue is relatively big or bright.
When projecting images by arranging the projectors side by side, adjust the shift amount of both projectors accordingly to superimpose the images.
NOTE:
●When using the projectors by arranging them side by side, ensure that the installation site is sufficiently strong and there is proper air cooling around the projectors. For details, please consult your authorized dealer. (A Page 12)
When light passes through the glass of projection booth
NOTE:
●When light passes through the glass, the quantity of light decreases. Make sure that the glass of the projection booth is not more than one piece.
●Do not use glass if possible.
●When projecting light on an inclined glass surface, adjust the glass angle as well as installation angle of this unit accordingly to prevent impact on the image due to diffuse reflection.
15