Barco LX-5 instruction manual Latest Error

Page 48

LX-5_EN.book Page 48 Friday, July 4, 2008 9:35 AM

Others

Latest Error

The latest error number appears in the Main Menu when an error occurs in the projector. Error details are as follows:

Error Number	Meaning

01	The lamp does not turn on.

02	Accumulated lamp time has exceeded 1500 hours.

06	The lamp goes off during projection.

08	Abnormal temperature in the projector.

09	Abnormal temperature around the intake vent.

0A	Abnormal temperature around the exhaust vent.

15	The lamp cover is open.

30	Trouble with CPU circuit board.

31	Trouble with MAIN circuit board.

32	Trouble with DD-RB circuit board.

33	Trouble with DD-G circuit board.

40	FAN1 (the cooling fan for DD) has stopped.

41	FAN2 (the cooling fan for the lamp) has stopped.

42	FAN3 (the cooling fan for over all exhaust) has stopped.

43	FAN4 (the cooling fan for the MAIN circuit board) has stopped.

44	FAN5 (the cooling fan for the lighting system (PCS) ) has stopped.

46	FAN7 (the cooling fan for the device) has stopped.

47	FAN8 (the cooling fan for the power supply of the lamp) has stopped.

49	FAN10 (the cooling fan for DD) has stopped.

4A	FAN11 (the cooling fan for DD) has stopped.

48

Image 48

Contents For Customer use Lens is optionalSafety Precautions About the installation placeMachine Noise Information Germany only Do not allow any unqualified person to install the unit Safety Precautions Cont’d Power cordDo not cut off the main plug from this equipment NeutralEMC Supplement Contents Features High flexible installationUser-friendly interface and high operability Accessories Accessories Sold SeparatelyPrecautions During Use Maintenance ProceduresBurning-in of D-ILA Device Viewing Conditions Brightness of RoomNames and Functions of Parts Front/Right SideRear Installation Optional projection lensMinimum Space Required Installing the Projector and Screen Projector Installation AngleInstalling the Projector and Screen Cont’d When shift amount in the left/right direction is 0 % When shift amount in the left direction is -50 % LXD 11 Short focal length lens When light passes through the glass of projection booth Projecting images by arranging projectors side by sideInstalling the Projector Screen Cont’d Screen Size and Projection Distance LXD 1.5 1.9 Zoom lens Approx .03 m LXD 11 Short focal length lens Connecting Video Signals of the Computer Connection During Single-Screen Mode Display Possible Input Signals and Projected Image Connection During Single-Screen Mode Display Connecting Video Signals Computer Cont’d Connection During Two-Screen/Four Screen Mode Display Connection Example During Two-Screen Mode Connection Example During Four-Screen ModeConnection Using a LAN Cable Specifications of PC for Controlling this Projector When assigning a static IP address When assigning IP address from the Dhcp serverTurning On the Main Power Is not attachedIP Address Settings IP address setting at the computerDefault Gateway Assigning a static IP addressDeselect the check Select AEnableB Cont’d Assigning a static IP address Cont’dUsing the Mail Delivery Feature After connecting, turn on the main powerSet the Adhcp ClientB setting of this projector to Adhcpb Assigning IP Address from the Dhcp ServerProjecting Image Useful Features During Projection Setting Menu Cont’d Main MenuSetting Value Description Power Latest ErrorSignal Status TemperatureImage Menu Setting Menu Setting Value Description Input LevelDisplay Mode Setting Value Description Red Convergence MenuImage Green color value is fixed This menu is used for adjusting the projection lens Lens MenuFocus ShiftOption Menu Network Menu Error message sent from this projector Mail MenuSetting Value Description Mail Setting MailAddress Smtp ServerCommunication Specifications Command FormatRS-232C Interface External control command table Parameters used for the data formatON/OFF Maintenance Cleaning and Replacing the FilterReplacement of Light Source Lamp Routine ServicingTroubleshooting Mode display Immediately After power is Turned on Screen doesImmediately When Projection has Ended Image isWhat to do when these messages are displayed Message Cause DetailsLamp Time Over Out of RangeIndicators Measures when the warning mode appearsIndicator Description Check MeasureLatest Error Specifications Specifications Cont’d RS-232C Terminal Pin No Signal Operation Signal DirectionDVI-D Terminal Pin No Signal Pin AssignmentDimensional Outline Drawing Top Side Front RearProjector