5.3EDP70 PLUS 50/80kVA
Ensure the AC supplies and load are switched OFF. Check that all the EDP70 PLUS UPS Switches (behind the front panel) are switched OFF, see figure 16.
The AC supply cables must be suitable for carrying the maximum supply demand. The voltage drop in the cable should be minimized to ensure the AC supply voltage at the EDP70 PLUS UPS terminals is within +/- 10% of nominal.
The EDP70 PLUS UPS should be connected to the main/reserve supplies and output load via a wall mounted junction box.
Installation | and | connection | should | only | be | carried | out | by | qualified | electrical | personnel. | |
S5 | = RESERVE OUTPUT switch |
|
|
|
|
|
|
|
| |||
S4 | = INVERTER OUTPUT Breaker |
|
|
|
|
|
|
| ||||
S3 | = |
|
|
|
|
|
|
|
|
| ||
S2 | = Equipment RESERVE switch |
|
|
|
|
|
|
| ||||
S1 | = Equipment ON/OFF Breaker |
|
|
|
|
|
|
|
| |||
Terminal board compartment |
|
|
|
|
|
|
|
| ||||
Figure 24 – 50/80kVA: Switches and Breakers
MI00/10056 rev. 8 —