10.5Abnormal operating mode messages
Under abnormal operating conditions, the normal functioning heading on the main page
UPS xx KVA
SYSTEM NORMAL
is replaced with the alarm page:
UPS xx KVA
SYSTEM ALARM
If at least 1 alarm is activated for each block; the »NO ALARMS ACTIVE» message in the second line on the display is replaced with the first active alarm. Whenever there is more than one active alarm, they can be scrolled through using the
and keys.
Each message is associated with one of the following conditions:
Conditions which do not adversely affect the normal functioning of the machine are identified under this heading.
No action is required on the part of the operator.
Transitory conditions which can either return to normal condition or result in a permanent fault are identified under this heading. No action is required on the part of the operator.
Faults are identified under this heading. The intervention of a qualified technician is required.
Alarms which do not come under any of these headings do not require any action if arising separately.
MAIN PAGE HEADING ALARMS |
|
|
|
MESSAGE | CONDITION |
TESTING BATTERY | NORMAL |
|
|
EPO ACTIVE | WARNING |
|
|
NOT CALIBRATED | FAULT |
|
|
TESTING AUTONOMY | WARNING |
|
|
SYSTEM TEST MODE | FAULT |
|
|
MI00/10056 rev. 8 —