InFocus IN5134A user manual IN5132/IN5142/IN5134/IN5134a IN5144/IN5144a/IN5135/IN5145, Features

Page 1

Projector

IN5132/IN5142/IN5134/IN5134a

IN5144/IN5144a/IN5135/IN5145

User's Manual (detailed)

Instant Stack Guide

Thank you for purchasing this product.

Features

This projector can be used in conjunction with another projector (same model) to project an image on the same screen using the Instant Stack feature.

The two projectors can be used simultaneously to make the image brighter. In addition, if you connect two projectors with RS-232 null modem cable, it becomes an intelligent stacking system. The two projectors can work alternately and once one malfunctions, the other projector will automatically start working to keep your presentation going.

These features, generically called Instant Stack, provide you with many uses.

About this manual

Various symbols are used in this manual. The meanings of these symbols are described below.

WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.

CAUTION This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.

NOTICE This entry indicates potential problems.

Please refer to the pages written following this symbol.

WARNING ►Before using this product, be sure to read all manuals for this product. After reading them, store them in a safe place for future reference. ►Follow all the instructions in the manuals or on the product. The manufacturer assumes no responsibility for any damage caused by mishandling that is beyond normal usage defined in the manuals.

NOTE • The information in this manual is subject to change without notice.

The manufacturer assumes no responsibility for any errors that may appear in this manual.

The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent.

Trademark acknowledgment

All the trademarks in this manual are the properties of their respective owners.

009-1416-01

1

Image 1
Contents IN5132/IN5142/IN5134/IN5134a IN5144/IN5144a/IN5135/IN5145 FeaturesContents Introduction Remote control for Intelligent Stack and Simple StackBasic information and preparations Instant StackIntroduction Preparing for Intelligent Stack InstallationDeciding the installation position Installing the first projector Set aSetting up Set a Advanced Menu Option Service Communication Stack Connecting projectors Installing the second projector Set BSetting up Set B Installation Confirming Main and Sub settings For Intelligent Stack users Fine adjusting image positionFor Simple Stack users Displaying Stack menu Stack menu settingsSelecting Main, Sub or off Only for IN5142, IN5144, IN5144a and IN5145 Selecting lamp operation modeSelecting lamp operation mode Selecting lamp switching mode Selecting input source for Sub Stack menu Exiting Intelligent Stack menuDialog from Stack menu Important information for Intelligent Stack USB Type A, USB Type B, LAN Example ServiceConnecting an RS-232 cable Connecting cablesInputting the image from Main to Sub Connecting signal cablesComputer IN1 and IN2 Inputting the image to Sub and Main individuallyPreparing for menu operations Setting input ports using menuChecking Main projectors operating status Starting up Main projector Inputting image from Main to Sub Computer signal Setting the menuInputting image to Sub and Main individually Setting input ports using menu Restrictions on the Main projector Restrictions on Schedule functionRestrictions on the Sub projector Restrictions on Schedule function Troubleshooting Two images are adjusted differently Remote control is pointed at the SubProjector Two images are not superimposed
Related manuals
Manual 167 pages 23.25 Kb