Installation
2.5 Fine adjusting image position
To superimpose the images of Main (Set B) and Sub (Set A), fine adjust the im- age size and position of Main (Set B) using PERFECT FIT.
For Intelligent Stack users
1.Press the MENU button on the remote control or the control panel on Main (Set B) to display the MENU dialog.
Highlight MAIN with the ▲/▼ buttons, and press the ► button.
Main (Set B)’s menu will appear.
2.Using the ▲/▼/◄/► buttons on the remote control or the control panel on Main (Set B), select PERFECT FIT from EASY MENU, or the SETUP menu of AD- VANCED MENU. (Operating Guide → EASY MENU or SETUP menu)
The image for Intelligent Stack appears on screen. This image includes a TEMPLATE screen with the PERFECT FIT dialog from Main (Set B) and another TEMPLATE screen from Sub (Set A).
3.Using PERFECT FIT on Main (Set B), adjust the im- age size and position of Main (Set B) to superimpose onto the image of Sub (Set A). (Operating Guide → EASY MENU or SETUP menu)
We recommend the following adjustments:
(1)Roughly adjust the four corners in the order below. Top left → Top right
→Bottom right → Bottom left
(2)Fine adjust the four corners in the same way.
Main (Set B)
<IN5132, IN5142, IN5134, IN5134a, IN5144, IN5144a>
<IN5135,
IN5145>
Image from Main (Set B)
Image from Sub (Set A)
<IN5132, IN5142, IN5134, IN5134a, IN5144, IN5144a>
<IN5135,
IN5145>
Superimposed image
Superimposed image
NOTE • Refer to NOTES for all users. (12)
11