Contents |
| |
|
| |
1. Introduction | 3 | |
1.1 | Basic information |
|
and preparations | 3 | |
| Instant Stack | 3 |
| Intelligent Stack and Simple Stack | 3 |
| Remote control for Intelligent Stack |
|
| and Simple Stack | 3 |
2. Installation | 5 | |
2.1 | Preparing for Intelligent Stack | 5 |
2.2 | Installing |
|
the first projector (Set A) | 6 | |
| Deciding installation position | 6 |
| Setting up Set A | 6 |
2.3 | Installing |
|
the second projector (Set B) | 8 | |
| Deciding installation position | 8 |
| Connecting projectors | 8 |
| Setting up Set B | 8 |
2.4 | Confirming Main |
|
and Sub settings | 10 | |
2.5 | Fine adjusting |
|
image position | 11 | |
| For Intelligent Stack users | 11 |
| For Simple Stack users | 12 |
|
| |
3. STACK menu settings | 13 | |
3.1 | Displaying STACK menu | 13 |
3.2 | Selecting Main, Sub or off | 14 |
3.3 | Selecting lamp operation mode... | 15 |
3.4 | Selecting lamp switching mode... | 17 |
3.5 | Selecting input source for Sub.... | 18 |
3.6 | Exiting Intelligent |
|
Stack menu | 19 | |
| STACK menu | 19 |
| Dialog from STACK menu | 19 |
3.7 | Important information |
|
for Intelligent Stack | 20 | |
4. Connecting cables | 23 | |
4.1 | Connecting an | 23 |
4.2 | Connecting signal cables | 24 |
| Inputting image from Main to Sub | 24 |
| Inputting image |
|
| to Sub and Main individually | 24 |
5. Setting input ports |
| |
using menu | 25 | |
5.1 | Preparing for menu operations.... | 25 |
5.2 | Checking Main projector's |
|
operating status | 25 | |
5.3 | Starting up Main projector | 26 |
5.4 | Setting the menu | 27 |
| Inputting image from Main to Sub |
|
| - Computer signal | 27 |
| Inputting image from Main to Sub |
|
| - Video signal |
|
| (either component or video) | 28 |
| Inputting image to |
|
| Sub and Main individually | 28 |
6. Restrictions |
| |
on Schedule function | 30 | |
7. Troubleshooting | 32 | |
2