STACK menu settings
3.3 Selecting lamp operation mode
Select DUAL or ALTERNATE lamp operation mode.
1.Highlight LAMP MODE in the STACK menu with the ▲/▼ buttons, then press the ► button to display the LAMP MODE dialog.
2.Use the ▲/▼ buttons in the dialog to highlight DUAL or ALTERNATE. DUAL: Turns on the projectors simultaneously.
ALTERNATE: Turns on the projectors alternately.
3.Press the ◄ button to return to the previous menu, or press the ► button to save the setting. (19)
NOTE • If DUAL is selected, a menu to select MAIN or SUB appears on screen when a button on the projector's control panel or remote control is pressed. Select the projector that you want to operate. Refer to the examples below:
-When the MENU button is pressed, a menu to select MAIN or SUB is displayed. If MAIN is selected, the Main projector’s EASY MENU or ADVANCED MENU is displayed.
-When one of the buttons from KEYSTONE, FOCUS + /
-<Only for IN5142, IN5144, IN5144a and IN5145>
When the ENTER button is pressed for three seconds, a menu to select MAIN or SUB is displayed. If MAIN is selected, the Status Monitor on the Main Projector can be operated.
• When DUAL is selected for LAMP MODE, the following restrictions are in
effect: |
| |
- AUTO POWER OFF and |
| |
FREEZE functions on both |
| |
projectors are disabled. | | |
- The test patterns for CUSTOM of | ||
GAMMA and COLOR TEMP are | Menu to select | |
not displayed. | MAIN or SUB | |
| ||
- The projectors take a little | Menu on Main projector | |
longer to turn on. This is not a | ||
| ||
malfunction. | | |
• In some cases when DUAL is | ||
selected, the screen may appear | Menu to select | |
darker when an OSD is displayed. | MAIN or SUB Menu on Main projector | |
(continued on next page) |
|
15