Installation
2.2 Installing the first projector (Set A)
Deciding the installation position
Decide the position of Set A and its projection angle. (User’s Manual (concise)
→Arrangement and Adjusting the projector’s elevator)
WARNING ► For IN5142, IN5144, IN5144a and IN5145 only: You can install the projector in any direction with specified mounting accessories. Consult with your dealer for that type of installation.
NOTE • Set the tilt angle of Set A within 9 degrees of the level line.
Setting up Set A
1.Turn on Set A.
2.Adjust the INSTALLATION settings first because it may change the image position. (Operating Guide → SETUP menu )
3.Adjust the image of Set A to fit the screen with the ZOOM, FOCUS and LENS SHIFT features. (Operating Guide → Adjusting the lens)
Adjust the image position using KEYSTONE and PERFECT FIT as needed. (Operating Guide → EASY MENU or SETUP menu)
NOTE • KEYSTONE cannot be selected when PERFECT FIT is in use. To adjust the image using both KEYSTONE and PERFECT FIT, adjust KEYSTONE first.
•If you are using Simple Stack, go to 2.3 Installation of the second projector (Set B). (8)
(continued on next page)
6