InFocus IN5144A, IN5132, IN5134A, IN5135, IN5142, IN5145 user manual Setting input ports using menu

Page 29

Setting input ports using menu

5.4 Setting the menu - Inputting image to Sub and Main individually (continued)

3.Use the ▲/▼ buttons to highlight SUB INPUT SOURCE, and press the ► button to display the SUB INPUT SOURCE dialog.

4.Use the ▲/▼ buttons to highlight FOLLOW MAIN UNIT, and press the ► button to save the setting. (19)

5.Press any source button on the remote control or the INPUT button of the Main projector. The MAIN INPUT SOURCE dialog will be displayed on screen. Use the ▲/▼ buttons to highlight the port which has the cable connected to it, and press the ► button to save the setting.

NOTE • If FOLLOW MAIN UNIT is selected, selecting the input source on either the Main or Sub projector will automatically set the other projector to the same source.

•If FOLLOW MAIN UNIT is selected, LAN, USB TYPE A and USB TYPE B cannot be selected.

•When FOLLOW MAIN UNIT is selected, if any source button on the remote control or the INPUT button on the Main projector is pressed, the dialog for selecting the input source will be displayed.

29

Image 29

Contents IN5132/IN5142/IN5134/IN5134a IN5144/IN5144a/IN5135/IN5145 FeaturesContents Introduction Remote control for Intelligent Stack and Simple StackBasic information and preparations Instant StackIntroduction Preparing for Intelligent Stack InstallationSetting up Set a Installing the first projector Set aDeciding the installation position Advanced Menu Option Service Communication Stack Setting up Set B Installing the second projector Set BConnecting projectors Installation Confirming Main and Sub settings For Intelligent Stack users Fine adjusting image positionFor Simple Stack users Displaying Stack menu Stack menu settingsSelecting Main, Sub or off Only for IN5142, IN5144, IN5144a and IN5145 Selecting lamp operation modeSelecting lamp operation mode Selecting lamp switching mode Selecting input source for Sub Dialog from Stack menu Exiting Intelligent Stack menuStack menu Important information for Intelligent Stack USB Type A, USB Type B, LAN Example ServiceConnecting an RS-232 cable Connecting cablesInputting the image from Main to Sub Connecting signal cablesComputer IN1 and IN2 Inputting the image to Sub and Main individuallyChecking Main projectors operating status Setting input ports using menuPreparing for menu operations Starting up Main projector Inputting image from Main to Sub Computer signal Setting the menuInputting image to Sub and Main individually Setting input ports using menu Restrictions on the Sub projector Restrictions on Schedule functionRestrictions on the Main projector Restrictions on Schedule function Troubleshooting Two images are adjusted differently Remote control is pointed at the SubProjector Two images are not superimposed

Related manuals

Manual 167 pages 23.25 Kb