InFocus IN5142, IN5132, IN5134A, IN5135, IN5144A, IN5145 user manual Selecting Main, Sub or off

Page 14

STACK menu settings

3.2 Selecting Main, Sub or off

To enable Intelligent Stack, select either MAIN or SUB. Intelligent Stack starts when one projector is set to MAIN and the other is set to SUB in the STACK MODE dialog. To disable Intelligent Stack, select OFF.

1.Highlight STACK MODE in the STACK menu with the ▲/▼ buttons, then press the ► button to display the STACK MODE dialog.

2.Use the ▲/▼ buttons in the dialog to highlight MAIN, SUB or OFF.

OFF: Disables Intelligent Stack.

MAIN: Defines the projector as the controlling projector.

SUB: Defines the projector as the subordinate projector.

3.Press the ◄ button to return to the previous menu, or press the ► button to save the setting. (19)

NOTE • After setting Main or Sub, the setting information can be checked on Projector Web Control. (Network Guide → Projector Web Control)

Select Projector Status in the main menu of Projector Web Control. Even if STACK MODE is set to OFF, the Stack Mode item shows whether your projector is set to MAIN or SUB.

14

Image 14

Contents Features IN5132/IN5142/IN5134/IN5134a IN5144/IN5144a/IN5135/IN5145Contents Basic information and preparations Remote control for Intelligent Stack and Simple StackIntroduction Instant StackIntroduction Installation Preparing for Intelligent StackSetting up Set a Installing the first projector Set aDeciding the installation position Advanced Menu Option Service Communication Stack Setting up Set B Installing the second projector Set BConnecting projectors Installation Confirming Main and Sub settings Fine adjusting image position For Intelligent Stack usersFor Simple Stack users Stack menu settings Displaying Stack menuSelecting Main, Sub or off Selecting lamp operation mode Only for IN5142, IN5144, IN5144a and IN5145Selecting lamp operation mode Selecting lamp switching mode Selecting input source for Sub Dialog from Stack menu Exiting Intelligent Stack menuStack menu Important information for Intelligent Stack USB Type A, USB Type B, LAN Service ExampleConnecting cables Connecting an RS-232 cableComputer IN1 and IN2 Connecting signal cablesInputting the image from Main to Sub Inputting the image to Sub and Main individuallyChecking Main projectors operating status Setting input ports using menuPreparing for menu operations Starting up Main projector Setting the menu Inputting image from Main to Sub Computer signalInputting image to Sub and Main individually Setting input ports using menu Restrictions on the Sub projector Restrictions on Schedule functionRestrictions on the Main projector Restrictions on Schedule function Troubleshooting Projector Remote control is pointed at the SubTwo images are adjusted differently Two images are not superimposed

Related manuals

Manual 167 pages 23.25 Kb