2.3 Installing the second projector (Set B) - Setting up Set B (continued)
3. Adjust the image size and position of Set B with the ZOOM, FOCUS and LENS SHIFT features so that the image can be completely superimposed to the image of Set A. (Operating Guide → Adjusting the lens)
NOTE • Afterwards, making fine adjustments to the image size and position, using functions such as KEYSTONE and PERFECT FIT, will not increase the image size. Therefore, it is important to have the image of Set B completely superimposed on the image of Set A.
• When controlling Set B with the remote control, Set A may also respond to the remote control. We recommend controlling Set B with the control panel on Set B.
• If you are using Simple Stack, go to For Simple Stack users. (12)
4. Display the menu with the MENU button. (Operating Guide → Using the menu function)
5. Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION > STACK
STACK menu will appear on screen.
(Operating Guide → OPTION menu)
6. Use the ▲/▼ buttons to highlight STACK MODE, and press the ► button to display the STACK MODE dialog.
Highlight MAIN with the ▲/▼ buttons, and
press the ◄ button to return to the previous menu.
7. Use the ▲/▼ buttons to highlight LAMP MODE, and press the ► button to display the LAMP MODE dialog.
Highlight DUAL with the ▲/▼ buttons, and press the ► button.
8. After pressing the ► button, a dialog to confirm whether or not to save the setting is displayed.
Press the ► button to save the setting. (19)
9