Picture Settings Menu
Adjusting the picture
The contrast, brightness, sharpness, color and tint can be adjusted as desired.
Example: Adjusting the contrast
1.On the MAIN MENU, select “PICTURE”, then press the MENU/ENTER button.
The “PICTURE” screen appears.
2.Use the ▲ and ▼ buttons to select “CONTRAST”.
|
|
| PICTURE |
| 1 / 2 | ||
| CONTRAST |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| BRIGHTNESS |
|
|
|
|
| |
| SHARPNESS |
|
|
|
|
| |
| COLOR |
|
|
|
|
| |
| TINT |
|
|
|
|
| |
|
|
|
|
|
| ||
| PICTURE MODE |
| : | NORMAL | |||
| NR |
| : | OFF | |||
| NEXT PAGE |
|
|
|
|
| |
| SEL. | ADJ. |
| EXIT | RETURN | ||
3. Use the and buttons to adjust the contrast.
CONTRAST
*If neither the or button is pressed within 5 seconds, the current setting is set and the previous screen reappears.
Note: If “CAN NOT ADJUST” appears ...
When trying to enter the PICTURE submenu, make sure PICTURE MODE is not set to DEFAULT.
Information
Picture adjustment screen
CONTRAST .... | Changes the picture’s white level. |
BRIGHTNESS .. | Changes the picture’s black level. |
SHARPNESS .. | Changes the picture’s sharpness. |
| Adjusts picture detail of VIDEO |
| display. |
COLOR | Changes the color density. |
TINT | Changes the picture’s tint. Adjust for |
| natural colored skin, background, etc. |
Adjusting the computer image
Only the contrast and brightness can be adjusted when a computer signal is connected.
Restoring the factory default settings
Select “DEFAULT” under the “PICTURE MODE” settings.
Setting the picture mode according to the brightness of the room
There are four picture modes that can be used effectively according to the environment in which you are viewing the display.
Example: Setting the “THEAT. 1” mode
1.On the MAIN MENU, select “PICTURE”, then press the MENU/ENTER button.
The “PICTURE” screen appears.
2.Use the ▲ and ▼ buttons to select “PICTURE MODE”.
|
|
| PICTURE |
| 1 / 2 | |||
CONTRAST |
|
|
|
|
|
| ||
BRIGHTNESS |
|
|
|
|
|
| ||
SHARPNESS |
|
|
|
|
|
| ||
|
|
|
|
|
| |||
COLOR |
|
|
|
|
|
| ||
TINT |
|
|
|
|
|
| ||
|
|
|
| : | NORMAL |
| ||
| PICTURE MODE |
| ||||||
|
|
|
|
|
|
|
| |
NR |
| : | OFF | |||||
|
| NEXT PAGE |
|
|
|
|
|
|
|
| SEL. | ADJ. |
| EXIT | RETURN | ||
3.To set to “THEAT. 1” ...
Use the and buttons to select “THEAT. 1”.
The mode switches as follows each time the or button is pressed:
→ BRIGHT ↔ NORMAL ↔ THEAT. 1 ↔ THEAT. 2 ↔ DEFAULT ←
|
|
PICTURE MODE | : THEAT. 1 |
|
|
*If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears.
Information
Types of picture modes
THEAT. 1, 2 ...... Set this mode when watching video in
a dark room.
This mode provides darker, finer pictures, like the screen in movie theaters.
For a darker image, select THEAT. 2. NORMAL ......... Set this mode when watching video in
a bright room.
This mode provides dynamic pictures with distinct differences between light and dark sections.
BRIGHT ........... This mode provides brighter pictures
than NORMAL.
DEFAULT ......... Use this to reset the picture to the
factory default settings.
32