Sharp MX-B200 manual Copier Functions, Copy Flow

Page 25

4	COPIER FUNCTIONS

This chapter explains basic and other copying functions.

The unit is equipped with a one-page memory buffer. This memory allows the unit to scan an original once only and make up to 99 copies. This feature improves workflow, reduces operation noise from the copier, and provides higher reliability by reducing wear and tear on the scanning mechanism.

COPY FLOW

1Make sure that paper has been loaded in the paper tray (p.10) or multi-bypass tray (p.12), and check the paper size (p.9).

If paper is not loaded, see page 10.

2Place the original.

If you are using the document glass, see "Using the document glass" (p.26).	4
If you are using the SPF, see "Using the SPF (Peripheral device)" (p.27).

When copying onto paper larger than A4 size, pull out the paper output tray extension.

3Select the copy settings.

•To set the number of copies, see page 28.

•To adjust the resolution and contrast settings, see page 28.

•To enlarge or reduce the copy, see page 30.

•To change the tray used, see page 30.

•To sort multiple original pages into sets, see page 31.

•To copy the front and rear sides of ID card onto a page, see page 34.

4Start copying.

Press the start ( ) key.

25

Image 25

Contents MX-B200 Contents Conventions Used in this Manual IntroductionOriginal cover Toner cartridge Part NamesOperation Panel Start indicator Indicators on the Operation PanelPower save indicator Scan indicatorAbout the scan head Power onInitial settings of operation panel Power off methodsPaper Loading PaperLoading the Paper Tray Gently push the paper tray back into the unit Open the multi-bypass tray and extend the tray Multi-bypass trayPaper must be fed narrow side into the feed slot Press the tray select key to select the multi-bypass traySoftware Installing the SoftwareMFP driver SharpdeskHardware and Software Requirements Double-click the Setup icon Installing the SoftwareSelect Connected to this Click the MFP Driver buttonComputer and click the Next button Connect the machine to your computer with a USB cable When installing is finished, click the Close buttonThis completes the installation of the software Select Connected via the network and click the Next button Using the machine as a shared printerYou will return to the window of . Click the Close button Select the printer name configured as a shared printerOpen the printer properties window Configuring the Printer DriverClick the Sharp MX-xxxx icon and select Properties Setting UP Button ManagerClick the OK button Page Copy Flow Copier FunctionsUsing the document glass Original PlacementAbout interrupt copying Using the SPF Peripheral device Setting a large originalDocument feeder tray Exposure adjustment Exposure ADJUSTMENT/PHOTO CopyingSET the Copy Quantity Automatic exposure adjustment Selecting the Tray REDUCTION/ENLARGEMENT/ZOOMPress the tray select key Sort Copy Using the SPF Peripheral device Place the originals. p.27 If the memory becomes full Press the ID Card key ID Card CopyBasic Printing Printer FunctionsMake sure that Sharp MX-xxxx is selected as the printer Pausing a print jobClick the Print button Click the Sharp MX-xxxx printer driver icon Opening the printer driver from the Start buttonSelect Properties from the Organize menu Click the Printing Preferences button in the General tabPrinter Driver Setting Screen Printing multiple pages on one page N-Up Printing Setting Advanced Print FunctionsPrint results Left To Right Right To LeftSelect the order of the pages Fitting the printed image to the paper Fit To Paper SizeRotating the print image 180 degrees Rotate 180 degrees Click the Main tab in the printer driver setup screenSelect the actual size of paper to be used for printing B5 Check the Rotate 180 degrees boxSelect the zoom ratio Enlarging/reducing the print image ZoomCheck the Text To Black box and/or the Vector To Black Click the Advanced tab in the printer driver setup screenBox Page Adding a watermark to printed pages Watermark Saving settings at the time of printing User Settings Saving Frequently Used Print SettingsClick the OK button Using saved settings Deleting saved settingsOutline of the Print Status Window Printer Driver Features Scanning Overview Scanner FunctionsApplication Place the original in the scanning position Application Application launched Number Scanning Using the Keys on the MachinePress the start Key Button Manager scan menu factory default Button Manager settingsOutline of Button Manager Scan Setup area Set the scan conditionsScanning from a TWAIN-compliant application Scanning from Your ComputerSelect Sharp MFP Twain Y, and click the Select button Placed the original in Step Scanning Source menu, select the location where youClick the Preview button Specify the scanning area and set the scan preferencesScanner driver settings Rotate button Preview screenImage Size button Click the Scan button Scanning from a WIA-compliant application Windows XP/Vista/7Scanning from the Scanner and Camera Wizard Windows XP Screen will appear. Select the next task When scanning ends, the followingThat you wish to perform, and then click Next buttonDescription of Special Functions Special FunctionsCheck original cover/SPF open function Toner Save ModeManual PhotoUser Programs Setting the user programsDisplaying Total Number of Copies Press the light key to return to the normal copy modeExample Total number of copies is 1,234 Press the light Key to return to the normal display Checking the Toner LevelToner Cartridge Replacement MaintenanceWhile pressing the lock release Button Gently pull the toner cartridge outLock release button Page Cabinet Cleaning the UnitDocument glass and the rear side of the original cover/SPF Transfer charger MACHINE/COPYING Problems Troubleshooting the UnitProblem Possible cause Solution Problem Possible cause Solution Printing and Scanning Problems Weight range Problem Cause and solutionPrinting is slow Programs Printed image Rear side of the paper Is lightYou have not specified a suitable resolution Alarm indicator, and take appropriate actionCover/SPF is dirty Original smudged or blotchyScanner transfer For the USB 2.0 interface Hi-Speed mode Machines power cord. Next, start your computerUnable to scan Speed is slowProblems During Setup of the Software Removing the software MFP driver cannot be installed Windows 2000/XPIndication Cause and remedy Status IndicatorsIndication Cause and remedy While pressing the start Misfeed RemovalKey, 64 is displayed Seal is not still affixed Misfeed in the paper feed area Lower the fusing unit release Misfeed in the fusing areaFusing unit release lever LeverMisfeed in the transport area Lower the fusing unit release leverMisfeed in the lower paper feed area Peripheral device Open the front coverMisfeed in the SPF Peripheral device Press the copy ratio display % key Developer Required Maintenance RequiredOptional Equipment System ConfigurationSingle Pass Feeder MX-SP10 Sheet Paper Feed Unit MX-CS10USB interface cable Interface cableOther Countries outside the EU Sharp Electronics Europe GmbH EN1

Related manuals

Manual 32 pages 56.91 Kb