Sharp MX-B200 manual User Programs, Setting the user programs

USER PROGRAMS

The user programs allow the parameters of certain functions to be set, changed, or cancelled as desired.

Setting the user programs

1		Press and hold down the light ( ) key for more than 5
		seconds until all the alarm indicators (					,	,	,	) blink and
	"		" appears in the display.
2		Use the left copy quantity (				) key to select a user program
		number (For the user program numbers, see the following table.).
		The selected number will blink in the left side of the display.
3		Press the start ( ) key. The entered program number will be
		steadily lit and the currently selected parameter number for the
		program will blink on the right side of the display.
4		Select the desired parameter using the right copy quantity ( ) key.
		The entered parameter number will blink on the right of the display.
	Program			Mode		Parameters
		No.
	1			Auto clear time	1	10 sec., 2		30 sec., *3		60 sec.,
					4	90 sec., 5		120 sec., 6		OFF
					*1	30 sec., 2		60 sec., 3		5 min.,
	2			Preheat mode	4	30 min., 5		60 min., 6		120 min.,
					7	240 min.
	3			Auto power shut- off	*1	ON, 2	OFF
				mode
	4			Auto power shut- off	*1	5 min., 2		30 min., 3		60 min.,
				timer	4	120 min., 5		240 min.
				SPF automatic
				original discharge	1	5 min., *2		30 min.,
	6			time (Only operates	3	60 min., 4		120 min.,
				when an SPF is	5	240 min., 6		OFF
				installed.)
	10			Resolution of AUTO	*1	300dpi, 2		600dpi
				& MANUAL mode
	13			Memory for printer	1	30%, 2	40%, *3		50%,
					4	60%, 5	70%
	21			Reset factory	1	YES, *2	NO
	22			Sort auto select	*1	ON, 2	OFF
				Prevention of OC
	24			copies when the	*1	ON, 2	OFF
				original cover/SPF
				is up function

7

63