Sharp MX-B200 manual Original Placement, Using the document glass, About interrupt copying

•If you start a print job while a copy job is in progress, the print job will

begin when the copy job is completed.

• The scanning function cannot be used while a copy job is in progress.

About interrupt copying

If you press the start ( ) key to begin a copy job while a print job using the paper tray or multi-bypass tray is in progress, the copy job will begin automatically after the print data in the unit's memory is printed (interrupt copying). When this is done, the print data remaining in the computer is not sent to the unit. When the copy job ends, press the clear key twice to change the unit to the online state, or wait until the set auto clear time (p.63) elapses. The remaining print data will be sent to the unit and printing will resume.

ORIGINAL PLACEMENT

Using the document glass

•	The document glass can read up to A4 original.	4
•	Image loss 4 mm can occur at the leading and trailing edges of the
	copies. Also image loss 4.5 mm in total can occur along the other
	edges of the copies.

•When copying a book or an original which has been folded or a crumpled original, press down the original cover/SPF lightly. If the original cover/ SPF is not securely closed, the copies may be striped or blurred.

•When using the document glass to scan an original, make sure that an original is not placed in the SPF.

1

2

Open the original cover/SPF, and place the original.

Place an original face down on the document glass. Align it with the original scale and the centring ( ) mark. Gently close the original cover/SPF.

By factory default, when a copy is made with the original/SPF cover open, the function for preventing excessive toner use activates and "OP" appears in the display. (See the "Check original cover/SPF open function" (p.62).)

Original scale

mark

26