Sharp MX-B200 manual Gently pull the toner cartridge out, While pressing the lock release Button

Page 67

3 Gently pull the toner cartridge out	Lock release button
while pressing the lock release
button.

• After removing the toner cartridge, do not shake it or tap on it. Doing so may cause toner to leak from the cartridge. Put the old cartridge immediately in the bag contained in the box of the new cartridge.

• Dispose of the old toner cartridge in accordance with local regulations.

4 Remove the toner cartridge from the bag. Grasp the cartridge on both sides and shake it horizontally four or five times. After shaking the cartridge, remove the toner seal.

4 or 5 times

Shutter

Toner seal

Grasp the toner cartridge as shown in the illustration. Do not hold the cartridge by the shutter. Be sure to only shake the cartridge before the toner seal is removed.

	5 Gently insert the toner cartridge
	along the guides until it locks in
	place while pushing the lock
	release lever. Remove the tape
	from the shutter. Pull the shutter	8
	out of the toner cartridge as	8
	out of the toner cartridge as
	shown in the illustration.
	Discard the shutter.

67

Image 67

Contents MX-B200 Contents Conventions Used in this Manual IntroductionOriginal cover Toner cartridge Part NamesOperation Panel Scan indicator Indicators on the Operation PanelStart indicator Power save indicatorAbout the scan head Power onInitial settings of operation panel Power off methodsPaper Loading PaperLoading the Paper Tray Gently push the paper tray back into the unit Open the multi-bypass tray and extend the tray Multi-bypass trayPaper must be fed narrow side into the feed slot Press the tray select key to select the multi-bypass traySharpdesk Installing the SoftwareSoftware MFP driverHardware and Software Requirements Double-click the Setup icon Installing the SoftwareSelect Connected to this Click the MFP Driver buttonComputer and click the Next button Connect the machine to your computer with a USB cable When installing is finished, click the Close buttonThis completes the installation of the software Select Connected via the network and click the Next button Using the machine as a shared printerYou will return to the window of . Click the Close button Select the printer name configured as a shared printerOpen the printer properties window Configuring the Printer DriverClick the Sharp MX-xxxx icon and select Properties Setting UP Button ManagerClick the OK button Page Copy Flow Copier FunctionsUsing the document glass Original PlacementAbout interrupt copying Using the SPF Peripheral device Setting a large originalDocument feeder tray Exposure adjustment Exposure ADJUSTMENT/PHOTO CopyingSET the Copy Quantity Automatic exposure adjustment Selecting the Tray REDUCTION/ENLARGEMENT/ZOOMPress the tray select key Sort Copy Using the SPF Peripheral device Place the originals. p.27 If the memory becomes full Press the ID Card key ID Card CopyBasic Printing Printer FunctionsMake sure that Sharp MX-xxxx is selected as the printer Pausing a print jobClick the Print button Click the Printing Preferences button in the General tab Opening the printer driver from the Start buttonClick the Sharp MX-xxxx printer driver icon Select Properties from the Organize menuPrinter Driver Setting Screen Left To Right Right To Left Setting Advanced Print FunctionsPrinting multiple pages on one page N-Up Printing Print resultsSelect the order of the pages Fitting the printed image to the paper Fit To Paper SizeCheck the Rotate 180 degrees box Click the Main tab in the printer driver setup screenRotating the print image 180 degrees Rotate 180 degrees Select the actual size of paper to be used for printing B5Select the zoom ratio Enlarging/reducing the print image ZoomCheck the Text To Black box and/or the Vector To Black Click the Advanced tab in the printer driver setup screenBox Page Adding a watermark to printed pages Watermark Deleting saved settings Saving Frequently Used Print SettingsSaving settings at the time of printing User Settings Click the OK button Using saved settingsOutline of the Print Status Window Printer Driver Features Scanning Overview Scanner FunctionsApplication Place the original in the scanning position Application Application launched Number Scanning Using the Keys on the MachinePress the start Key Button Manager scan menu factory default Button Manager settingsOutline of Button Manager Scan Setup area Set the scan conditionsScanning from a TWAIN-compliant application Scanning from Your ComputerSelect Sharp MFP Twain Y, and click the Select button Specify the scanning area and set the scan preferences Scanning Source menu, select the location where youPlaced the original in Step Click the Preview buttonScanner driver settings Rotate button Preview screenImage Size button Click the Scan button Scanning from a WIA-compliant application Windows XP/Vista/7Scanning from the Scanner and Camera Wizard Windows XP Next button When scanning ends, the followingScreen will appear. Select the next task That you wish to perform, and then clickDescription of Special Functions Special FunctionsPhoto Toner Save ModeCheck original cover/SPF open function ManualUser Programs Setting the user programsDisplaying Total Number of Copies Press the light key to return to the normal copy modeExample Total number of copies is 1,234 Press the light Key to return to the normal display Checking the Toner LevelToner Cartridge Replacement MaintenanceWhile pressing the lock release Button Gently pull the toner cartridge outLock release button Page Cabinet Cleaning the UnitDocument glass and the rear side of the original cover/SPF Transfer charger MACHINE/COPYING Problems Troubleshooting the UnitProblem Possible cause Solution Problem Possible cause Solution Printing and Scanning Problems Printed image Rear side of the paper Is light Problem Cause and solutionWeight range Printing is slow ProgramsOriginal smudged or blotchy Alarm indicator, and take appropriate actionYou have not specified a suitable resolution Cover/SPF is dirtySpeed is slow Machines power cord. Next, start your computerScanner transfer For the USB 2.0 interface Hi-Speed mode Unable to scanProblems During Setup of the Software Removing the software MFP driver cannot be installed Windows 2000/XPIndication Cause and remedy Status IndicatorsIndication Cause and remedy While pressing the start Misfeed RemovalKey, 64 is displayed Seal is not still affixed Misfeed in the paper feed area Lever Misfeed in the fusing areaLower the fusing unit release Fusing unit release leverOpen the front cover Lower the fusing unit release leverMisfeed in the transport area Misfeed in the lower paper feed area Peripheral deviceMisfeed in the SPF Peripheral device Press the copy ratio display % key Developer Required Maintenance RequiredSheet Paper Feed Unit MX-CS10 System ConfigurationOptional Equipment Single Pass Feeder MX-SP10USB interface cable Interface cableOther Countries outside the EU Sharp Electronics Europe GmbH EN1

Related manuals

Manual 32 pages 56.91 Kb